Du er her:
Norsk akkreditering

Akkrediteringsomfang for

TEST 034

Applica Test & Certification AS

Veritasveien 1
1363 HØVIK

Telefon: +47 382 58 777
E-post: info@applica.no
Hjemmeside: http://www.applica.no
Laboratoriet tilfredsstiller kravene i

NS-EN ISO/IEC 17025:2017




Akkrediteringen omfatter:
Den administrative/geografiske enheten:
Avdeling Høvik
Veritasveien 1
1322 HØVIK



Feltlaboratorium
P3002 Prøvetaking luft
Objekt
Parameter
Referansestandard
Intern metode identitet
Merknad
Objekt
Stationary source emission
Parameter
Sampling for determination of volume concentration of oxygen (O2)
Referansestandard
NS-EN 14789
Intern metode identitet
ONO-6-AIR-5-i6
Merknad
Objekt
Stationary source emissions
Parameter
Sampling for determination of the mass concentration of carbon monoxide
Referansestandard
NS-EN 15058
Intern metode identitet
ONO-6-AIR-5-i6
Merknad
Objekt
Stationary source emissions
Parameter
Determination of the water vapour in ducts
Referansestandard
NS-EN 14790
Intern metode identitet
ONO-6-AIR-5-i2
Merknad
This European Standard is applicable in the range of water vapour content from 4 % to 40 % as volume concentrations and of water vapour mass concentration from 29 g/m3 to 250 g/m3 as a wet gas.
Objekt
Stationary source emissions
Parameter
Determination of low range mass concentration of dust
Referansestandard
NS-EN 13284-1
Intern metode identitet
ONO-6AIR-5-i11
Merknad
Objekt
Stationary source emissions
Parameter
Determination of the mass concentration of individual gaseous organic compounds
Referansestandard
CEN/TS 13649
Intern metode identitet
ONO-6-AIR-5-i7
Merknad
Objekt
Stationary source emissions
Parameter
Determination of the mass concentration of total gaseous organic carbon
Referansestandard
NS-EN 12619
Intern metode identitet
ONO-6-AIR-5-i14
Merknad
At low concentrations in flue gases- Continuous flame ionisation detector method
Objekt
Stationary source emissions
Parameter
Sampling, for determination of mass concentration of sulphur dioxide
Referansestandard
NS-EN 14791
Intern metode identitet
ONO-6-AIR-5-i3
Merknad
Objekt
Stationary source emissions
Parameter
Sampling for determination of mass concentration of nitrogen oxides (NOx)
Referansestandard
NS-EN 14792
Intern metode identitet
ONO-6-AIR-5-i6
Merknad
Objekt
Stationary source emissions
Parameter
For mass concentration of gaseous chlorides expressed as HCl
Referansestandard
NS-EN 1911
Intern metode identitet
ONO-6-AIR-5-i3
Merknad
Objekt
Stationary source emissions
Parameter
For determination of the concentration of total mercury
Referansestandard
NS-EN 13211
Intern metode identitet
ONO-6-AIR-5-i4
Merknad
Objekt
Stationary source emissions
Parameter
For measurement of velocity and volume flowrate of gas streams in ducts
Referansestandard
ISO 10780
Intern metode identitet
ONO-6-AIR-5-i18
Merknad
Objekt
Stationary source emissions
Parameter
Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
Referansestandard
NS-EN 14385
Intern metode identitet
ONO-6-AIR-5-i11
Merknad
Objekt
Stationary source emissions
Parameter
For determination of gaseous fluoride content HF.
Referansestandard
ISO 15713
Intern metode identitet
ONO-6-AIR-5-i3
Merknad
Objekt
Stationary source emissions
Parameter
For determination of gas and particle-phase polycyclic aromatic hydrocarbons (PAH). Part 1: Sampling
Referansestandard
NS-ISO 11338-1
Intern metode identitet
ONO-6-AIR-5-i5 ONO-6-AIR-5-i31
Merknad
Objekt
Stationary source emissions
Parameter
For determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
Referansestandard
NS-EN 1948-1
Intern metode identitet
ONO-6-AIR-5-i5 ONO-6-AIR-5-i31
Merknad
Permanent laboratorium
P06 EMC, Elektromagnetisk kompatibilitet
Objekt
Parameter
Referansestandard
Intern metode identitet
Merknad
Objekt
Burglar alarm equipment
Parameter
Product standard
Referansestandard
EN 50130-4
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Including A1:2014
Objekt
Electrical / electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
Referansestandard
EN 61000-6-2
Intern metode identitet
ONO-6 EMC-5-i15
Merknad
Includes: EN 61000-6-2:2005 and AC:2005 IEC 61000-6-2:2019
Objekt
Electrical and electronic equipment
Parameter
Limitation of voltage changes, voltage fluctuations and flicker
Referansestandard
EN 61000-3-3
Intern metode identitet
ONO-6-EMC-5-i5
Merknad
Includes: NEK IEC 61000-3-3:2013:A1:2017 and NEK IEC 61000-3-3:2013:A2:2021 CSV
Objekt
Electrical and electronic equipment
Parameter
Eletromagnetic compability testing
Referansestandard
International Association of Classification Societies (IACS) E10
Intern metode identitet
NO-6-EMC-5-ix series
Merknad
Inkluderer Corr. 1 Jan. 2022. EMC testing according to clause 3/4/9/10/13/14/15/16/17/18/19/29 is included.
Objekt
Electrical and electronic installations in ships
Parameter
Electromagnetic compatibility (EMC) - Ships with a metallic hull
Referansestandard
IEC 60533
Intern metode identitet
ONO-6-EMC-5ix
Merknad
Corresponds to NEK IEC 60533:2015 and refers to IEC 60945
Objekt
Electrical and electronical equipment
Parameter
Limits for harmonic current emissions
Referansestandard
EN 61000-3-2
Intern metode identitet
ONO-6-EMC-5-i4
Merknad
Includes: IEC 61000-3-2:2018 +A1/2020.
Objekt
Electrical and electronical equipment
Parameter
Voltage dips, short interruptions and voltage variations immunity tests
Referansestandard
EN 61000-4-11
Intern metode identitet
ONO-6-EMC-5-i20
Merknad
Objekt
Electrical, electronic and programmable equipment and systems
Parameter
Electromagnetic compability testing (EMC)
Referansestandard
DNV-CG-0339
Intern metode identitet
NO-6-EMC-5-ix series
Merknad
EMC testing according to clause 4/5/12/13/14/ is included.
Objekt
Electrical/electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Referansestandard
IEC 61000-4-3
Intern metode identitet
ONO-6-EMC-5-i15
Merknad
Objekt
Electrical/electronic equipment
Parameter
Environmental testing - Part 1: General and guidance
Referansestandard
IEC 60068-1
Intern metode identitet
Merknad
Objekt
Electrical/electronic equipment
Parameter
Immunity to electrostatic discharge (ESD)
Referansestandard
IEC 61000-4-2
Intern metode identitet
ONO-6-EMC-5-i13
Merknad
Objekt
Electrical/electronic equipment
Parameter
Electrical fast transient/burst immunity test
Referansestandard
IEC 61000-4-4
Intern metode identitet
ONO-6-EMC-5-i14
Merknad
Objekt
Electrical/electronic equipment
Parameter
Surge immunity test
Referansestandard
IEC 61000-4-5
Intern metode identitet
ONO-6-EMC-5-i17
Merknad
Objekt
Electrical/electronic equipment
Parameter
Immunity to conducted disturbances, induced by radio-frequency fields
Referansestandard
IEC 61000-4-6
Intern metode identitet
ONO-6-EMC-5-i16
Merknad
Objekt
Electrical/electronic equipment
Parameter
Power frequency magnetic field immunity test
Referansestandard
IEC 61000-4-8
Intern metode identitet
ONO-6-EMC-5-i19
Merknad
Objekt
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
Referansestandard
EN 61000-6-3
Intern metode identitet
ONO-6-EMC-5-i28 ONO-6-EMC-5-i29
Merknad
Includes: EN 61000-6-3:2007 +A1/2011 and AC:2012. IEC 61000-6-3:2021. Test for discontinuous interference as listed in table 4 clause 4.4 in this standard is not included.
Objekt
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
Referansestandard
EN 61000-6-4
Intern metode identitet
ONO-EMC-5-i28 ONO-EMC-5-i29
Merknad
Includes: EN 61000-6-4 +A1/2011. IEC 61000-6-4:2019.
Objekt
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial
Referansestandard
EN 61000-6-1
Intern metode identitet
ONO-6 EMC-5-i15
Merknad
Includes: IEC 61000-6-1:2019 +A1/2020
Objekt
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.
Referansestandard
MIL-STD-461G
Intern metode identitet
MIL-STD-461G
Merknad
RE101, RE102, RE103, RS101, RS103, CS101, CS109, CS114, CS 115, CS116, CS118, CE 101, CE 102
Objekt
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Referansestandard
NATO-AECTP-500
Intern metode identitet
ONO-6-EMC-5-i36
Merknad
Electromagnetic Environmental Effects Tests and verification Edition E Version 1 December 2016 - Category 501: Equipment and Subsystem testing. NCE01 NCE02 NCE04 NCS01 NCS02 NCS06 NCS07 NCS08 NCS09 NCS12 NRE01 NRE02 NRS01 NRS02
Objekt
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Referansestandard
MIL-STD-1275E
Intern metode identitet
ONO-6-EMC-5-i35
Merknad
Characteristics of 28 Volt DC Input Power to Utilization Equipment in Military Vehicles
Objekt
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Referansestandard
MIL-STD-704F
Intern metode identitet
ONO-6-EMC-5-i34
Merknad
Aircraft Electric Power Characteristics. Test methods LDC 101 - LDC 602 as specified in MIL-HDBK-704-8. Limited to 28 VDC powered equipment
Objekt
Maritime navigation and radiocommunication equipment and systems
Parameter
Electromagnetic compatibility (EMC)
Referansestandard
IEC 60945
Intern metode identitet
ONO-6-EMC-5-ix
Merknad
Including Cor1:2008. EMC testing according to clause 9 & 10 of the standard.
Objekt
Multimedia equipment
Parameter
Electromagnetic compatibility
Referansestandard
EN 55032
Intern metode identitet
ONO-6-EMC-5-i28 ONO-6-EMC-5-i29
Merknad
Harmonised standard ref. Official Journal (EU). The accreditation does not include testing of TV, FM og satellite. Harmonised standard; EN 55032:2015; and EN 55032:2015/A11:2020
Objekt
Multimedia equipment
Parameter
Electromagnetic compatibility of multimedia equipment - Immunity requirements
Referansestandard
EN 55035
Intern metode identitet
ONO-6-EMC-5-i13 ONO-6-EMC-5-i16 ONO-6-EMC-5-i15 ONO-6-EMC-5-i19 ONO-6-EMC-5-i14 ONO-6-EMC-5-i17 ONO-6-EMC-5-i20
Merknad
Broadband impulsive conducted disturbances is not included.
Objekt
Product standard for: Fire Detection and Fire Alarm systems
Parameter
Part 4: Power Supply Equipment
Referansestandard
EN 54-4
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
EMC testing according to clause 9.9 - 9.13 of the standard. Including A1 (2002) and A2 (2006)
Objekt
Product standard for: Fire Detection and Fire Alarm systems Product standard for: Fire Detection and Fire Alarm systems
Parameter
Part 2: Control and indicating equipment
Referansestandard
EN 54-2
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
EMC testing according to clause 15.8 - 15.13 of the standard. Including AC (1999)
P17 Miljø
Objekt
Parameter
Referansestandard
Intern metode identitet
Merknad
Objekt
Alarm systems
Parameter
Environmental testing
Referansestandard
EN 50130-5
Intern metode identitet
ON0-6-ALA-5-il
Merknad
Objekt
Elecrical/electronic equipment
Parameter
Test Cab: Damp heat, steady state
Referansestandard
EN 60068-2-78
Intern metode identitet
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Merknad
Objekt
Electrical and electronic equipment
Parameter
Dry heat
Referansestandard
EN 60068-2-2
Intern metode identitet
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronic and mechanical equipment
Parameter
Damp heat, Cyclic
Referansestandard
EN 60068-2-30
Intern metode identitet
ONO-6-ENV-5-i7 & ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronic equimpment
Parameter
Shock
Referansestandard
IEC 60068-2-27
Intern metode identitet
ONO-6-ENV-5-i12 & ONO-6-ENV-5-i13
Merknad
Objekt
Electrical/electronic equipment
Parameter
Degrees of protection provided by enclosures (IP Code)
Referansestandard
EN 60529
Intern metode identitet
ONO-6-ENV-5-i11 & ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronic equipment
Parameter
Vibration (sinusoidal) equipment
Referansestandard
IEC 60068-2-6
Intern metode identitet
ONO-6-ENV-5-i12 & ONO-6-ENV-5-i13
Merknad
Objekt
Electrical/electronic equipment
Parameter
Enviromental testing according to MIL-STD 810 F
Referansestandard
Intern metode
Intern metode identitet
ONO-6-ENV-5-i21
Merknad
Metode basert på MIL-STD 810 F
Objekt
Electrical/Electronic equipment
Parameter
Enviromental testing according to - MIL-STD-810G
Referansestandard
Intern metode
Intern metode identitet
ONO-6-ENV-5-i21
Merknad
The accreditation scope is limited to the following: Method 500.6 - Low pressure/501.7 - High Temperature/ 502.7 - Low temperature/503.7 - Temperature Shock/506.6 - Rain/507.6 - Humidity/509.7 - Salt fog/512.6 - Immersion/514.8 - Vibration/516.8 - Shock/528.1 - vibration of shipboard
Objekt
Electrical/electronic equipment
Parameter
Storage test temperature range -70°C to + 180°C
Referansestandard
EN 60068-2-48
Intern metode identitet
ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronic equipment
Parameter
Rough handling shocks, primarily for equipment-type specimens
Referansestandard
IEC 60068-2-31
Intern metode identitet
ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronic equipment
Parameter
Hammer tests
Referansestandard
IEC 60068-2-75
Intern metode identitet
ONO-6-ENV-5-i6
Merknad
Test Ehb: Impact energy level: 0,5J, 0,7J and 1,0J
Objekt
Electrical/electronic equipment
Parameter
Temperature, Cold
Referansestandard
IEC 60068-2-1
Intern metode identitet
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronic equipment
Parameter
Salt mist, cyclic (sodium, chloride solution)
Referansestandard
IEC 60068-2-52
Intern metode identitet
ONO-6-ENV-5-i7 & ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/Electronic equipment
Parameter
Enviromental testing
Referansestandard
MIL-STD-810H
Intern metode identitet
ONO-6-ENV-5-i21
Merknad
The accreditation scope is limited to the following: - Method 500.6 - Low pressure - Method 501.7 - High Temperature - Method 502.7 - Low temperature - Method 503.7 - Temperature Shock - Method 506.6 - Rain - Method 507.6 - Humidity - Method 509.7 - Salt fog - Method 512.6 - Immersion - Method 514.8 - Vibration - Method 516.8 - Shock - Method 528.1 - vibration of shipboard equipment
Objekt
Electrical/electronic equimpment
Parameter
Salt mist
Referansestandard
IEC 60068-2-11
Intern metode identitet
ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronical equipment
Parameter
Environmental testing
Referansestandard
DNV-CG-0339
Intern metode identitet
NO-6-EMC-5-ix series
Merknad
ENV testing according to clause 4/5/6/7/8/9/10/11/12/13 is included.
Objekt
Electrical/electronical equipment
Parameter
Change of temperature
Referansestandard
IEC 60068-2-14
Intern metode identitet
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Merknad
Objekt
Electrical/electronical equipment
Parameter
Electrical/electronical equipment
Referansestandard
International Association of Classification Societies (IACS) E10
Intern metode identitet
NO-6-EMC-5-ix series
Merknad
Includes Corr.1 Jan. 2022. ENV testing according to clause 5/6/7/8/11/12 is included.
Objekt
Fire detection and fire alarm systems
Parameter
Control and indicating equipment
Referansestandard
EN 54-2
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
Including AC (1999) Testing according to clause 9.5-9.8 and 9.14-9.15
Objekt
Fire detection and fire alarm systems
Parameter
Fire detection and fire alarm systems Part 4: Power supply equipment
Referansestandard
EN 54-4
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
Objekt
Maritime navigation and radiocommunication equipment and systems
Parameter
Environmental testing
Referansestandard
EN 60945
Intern metode identitet
ONO-6-ENV-5-i18
Merknad
Testing according to clause 8, 11 & 12 of the standard. Corresponding to IEC 60945
P18 Oppførsel
Objekt
Parameter
Referansestandard
Intern metode identitet
Merknad
Objekt
Alarm system - Intrusion and hold up systems
Parameter
Roles for alarm transmission systems - Intrusion alarm
Referansestandard
SSF 114
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Edition 3
Objekt
Alarm system - Intrusion and hold-up systems
Parameter
Forsikring & pension - Automatiske indbrudsalarmanlegg
Referansestandard
AIA - katalogen
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Objekt
Alarm systems
Parameter
Specific requirements for Supervised Premises Transceiver (SPT)
Referansestandard
EN 50131-10
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
2014
Objekt
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for Receiving Centre Transceiver (RCT)
Referansestandard
EN 50136-3
Intern metode identitet
ONO-6-ALA-5i1
Merknad
Specification of the minimum equipment requirements for the performance, reliability, resilience, security and safety characteristics of the receiving centre transceiver (RCT) installed in ARC and used in alarm transmission systems.
Objekt
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for the performance, reliability and security characteristics of the alarm transmission systems
Referansestandard
EN 50136-1
Intern metode identitet
ON0-6-ALA-5-i1
Merknad
Including A1:2018
Objekt
Alarm systems - Alarm transmission systems and equipment
Parameter
Equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT)
Referansestandard
EN 50136-2
Intern metode identitet
ON0-6-ALA-5-i3
Merknad
Objekt
Alarm systems - Alarm transmission systems and equipment
Parameter
Equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT)
Referansestandard
EN 50136-2
Intern metode identitet
ON0-6-ALA-5-i3
Merknad
Objekt
Alarm systems - Alarm transmission systems and equipment
Parameter
General requirements for alarm transmission equipment according to EN 50136-1-1:1998.
Referansestandard
Intern metode
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Including A1 (2001) and A2 (2008)
Objekt
Alarm systems - Alarm transmission systems and equipment
Parameter
General requirements for alarm transmission equipment according to EN 50136-2-1:1998
Referansestandard
Intern metode
Intern metode identitet
Merknad
Including A1 (2001).
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Opening contacts (magnetic)
Referansestandard
EN 50131-2-6
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
System requirements
Referansestandard
EN 50131-1
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Including A3:2020.
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Control and indicating equipment
Referansestandard
EN 50131-3
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Requirements for passive infrared detectors
Referansestandard
EN 50131-2-2
Intern metode identitet
ONO-6-ALA-5-i5
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Requirements for microwave detectors
Referansestandard
EN 50131-2-3
Intern metode identitet
ONO-6-ALA-5-i5
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Requirements for combined passive infrared and microwave detectors
Referansestandard
EN 50131-2-4
Intern metode identitet
ONO-6-ALA-5-i5
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Warning devices
Referansestandard
EN 50131-4
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Power supplies
Referansestandard
EN 50131-6
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Including A1:2021
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
Security fog devices
Referansestandard
EN 50131-8
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Objekt
Alarm systems - Intrusion and hold-up systems
Parameter
System components - Intruder alarm systems - Requirements and test methods
Referansestandard
SSF 1014
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Edition 5
Objekt
Alarm systems - Intrusion systems
Parameter
Requirements for interconnections equipment using radio frequency techniques
Referansestandard
EN 50131-5-3
Intern metode identitet
ONO-6-ALA-5-i1
Merknad
Objekt
Alarm transmission systems and equipment
Parameter
Requirements for the performance, reliability and security characteristics of the alarm transmission systems
Referansestandard
EN 50136-1
Intern metode identitet
ON0-6-ALA-5-i1
Merknad
Including A1:2018.
Objekt
Fire detection and fire alarm systems
Parameter
Control and indicating equipment
Referansestandard
EN 54-2
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
(1997) Including AC (1999) and A1(2006)
Objekt
Fire detection and fire alarm systems
Parameter
Power supply equipment
Referansestandard
EN 54-4
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
(1997) Including A1 (2002) and A2 (2006)
Objekt
Fire detection and fire alarm systems
Parameter
Equipment
Referansestandard
SBF 1421
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
Objekt
Fire detection and fire alarm systems
Parameter
Alarm transmission and fault warning routing equipment
Referansestandard
NS-EN 54-21
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
Objekt
Fire detection and fire alarm systems
Parameter
Compatibility assessment of system components
Referansestandard
EN 54-13
Intern metode identitet
ONO-ALA-5-i1
Merknad
Including A1:2019
Objekt
Fire detection and fire alarm systems - Input/output devices
Parameter
Functional requirements
Referansestandard
NS-EN 54-18
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
Objekt
Fire detection and fire alarm systems. Short-circuit isolators
Parameter
Functional requirements
Referansestandard
NS-EN 54-17
Intern metode identitet
ONO-6-ALA-5-i3
Merknad
Den administrative/geografiske enheten:
Avdeling Mandal
Doneheia 17
4516 Mandal



Permanent laboratorium
P06 EMC, Elektromagnetisk kompatibilitet
Objekt
Parameter
Referansestandard
Intern metode identitet
Merknad
Objekt
Electrical and electronic equipment
Parameter
Eletromagnetic compability testing
Referansestandard
International Association of Classification Societies (IACS) E10
Intern metode identitet
TP-C series of tests procedures.
Merknad
Inkluderer Corr. 1 Jan. 2022. EMC testing according to clause 3/4/9/10/13/14/15/16/17/18/19/29 is included.
Objekt
Electrical and electronic equipment
Parameter
Immunity to conducted disturbances, induced by radio-frequency fields
Referansestandard
NEK EN 61000-4-6
Intern metode identitet
TP-C-Conducted RF immunity
Merknad
Objekt
Electrical and electronic equipment
Parameter
Power frequency magnetic field immunity test
Referansestandard
NEK EN 61000-4-8
Intern metode identitet
TP-C-Power-frequency magnetic field
Merknad
Objekt
Electrical and electronic equipment
Parameter
Voltage dips, short interruptions and voltage variations immunity tests
Referansestandard
IEC 61000-4-11
Intern metode identitet
TP-C-Voltage dips and interruptions
Merknad
Objekt
Electrical and electronic installations in ships
Parameter
Electromagnetic compatibility (EMC)
Referansestandard
IEC 60533
Intern metode identitet
Selection of basic tests
Merknad
Corresponds to NEK IEC 60533:2015
Objekt
Electrical, electronic and programmable equipment and systems
Parameter
Electromagnetic compability testing (EMC)
Referansestandard
DNV-CG-0339
Intern metode identitet
TP-C series of tests procedures.
Merknad
EMC testing according to clause 4/5/12/13/14/ is included.
Objekt
Electrical/electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Referansestandard
IEC 61000-4-3
Intern metode identitet
TP-C-Radiated immunity
Merknad
Objekt
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
Referansestandard
EN 61000-6-4
Intern metode identitet
Selection of basic tests
Merknad
Includes: EN 61000-6-4 +A1/2011. IEC 61000-6-4:2019.
Objekt
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
Referansestandard
EN 61000-6-3
Intern metode identitet
Selection of basic tests
Merknad
Includes: EN 61000-6-3:2007 +A1/2011 and AC:2012. IEC 61000-6-3:2021.
Objekt
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial
Referansestandard
EN 61000-6-1
Intern metode identitet
Selection of basic tests
Merknad
Includes: IEC 61000-6-1:2019.
Objekt
Electrical/electronic equipment
Parameter
Surge immunity test
Referansestandard
IEC 61000-4-5
Intern metode identitet
TP-C-Slow transient (surge)
Merknad
Including A1:2017
Objekt
Electrical/electronic equipment
Parameter
Immunity to electrostatic discharge (ESD)
Referansestandard
IEC 61000-4-2
Intern metode identitet
TP-C-Electrostatic discharge (ESD)
Merknad
Objekt
Electrical/electronic equipment
Parameter
Electrical fast transient/burst immunity test
Referansestandard
IEC 61000-4-4
Intern metode identitet
TP-C-Fast transient (burst)
Merknad
Objekt
Electrical/electronical equipment
Parameter
Generic standards - Immunity standard for industrial environments
Referansestandard
EN 61000-6-2
Intern metode identitet
Selection of basic tests
Merknad
Includes: EN 61000-6-2:2005 + AC:2005, Part 4-20, 4-21, 4-22 and 4-34 are excluded. IEC 61000-6-2:2019.
Objekt
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.
Referansestandard
MIL-STD-461G
Intern metode identitet
RE101, RE102, RE103, RS101, RS103, CS101, CS114, CS 115, CS116, CS118, CE101, CE102
Merknad
RE101, RE102, RE103, RS101, RS103, CS101, CS114, CS 115, CS116, CS118, CE101, CE102
Objekt
Industrial, scientific and medical (ISM) radio-frequency equipment
Parameter
Radio disturbance characteristics - Limits and methods of measurement
Referansestandard
EN 55011
Intern metode identitet
TP-C series of tests procedures.
Merknad
Including A1:2017 + A11:2020
Objekt
Information technology equipment
Parameter
Immunity characteristics - Limits and methods of measurement
Referansestandard
EN 55024
Intern metode identitet
Selection of basic tests
Merknad
Corresponding to IEC 55024
Objekt
Maritime navigation and radiocommunication equipment and systems
Parameter
Electromagnetic compatibility (EMC)
Referansestandard
IEC 60945
Intern metode identitet
Selection of basic tests
Merknad
Including Corr 1:2008. EMC testing according to clause 9 & 10.
Objekt
Multimedia equipment
Parameter
Electromagnetic compatibility
Referansestandard
EN 55032
Intern metode identitet
Selection of basic tests
Merknad
Harmonised standard ref. Official journal. EN 55032:2015 and EN 55032:2015/A11:2020. The accreditation does not include Annex C.3.7, C.3.8, C.4.2, C.4.3 & Annex H