You are here:
Norwegian accreditation

Accreditation scope for

TEST 262

VANN VEST AS

Spelhaugen 22
5147 Fyllingsdalen

Telephone: 90625432
E-mail: Helge.Botnen@vannvest.no
Internet: http://www.vannvest.no
The laboratory meets the requirements in

NS-EN ISO/IEC 17025:2017




Accreditation includes:
The administrative / geographical unit:
Byrkjelo renseanlegg
Breimsvegen 1741
Byrkjelo 6826



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
11173
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Flesland rensenanlegg
Fleslandsvegen 111
5239 Blomsterdalen



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
ID: 17938
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17937
Comment
Automatic sampling volume proportional samples from open water systems
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fæster Brygge renseanlegg
Brøstanesveien 86-98
5178 Loddefjord



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
17853
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Førde renseanlegg
Øyrane 11
6800 Førde



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
ID: 17044
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
17876
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Gismarvik renseanlegg
Havnavegen 332
5570 Aksdal



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17918
Comment
Automatic sampling volume proportional samples from open water systems.
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Holen renseanlegg
Johan Berentsensvei 48
5160 Laksevåg



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17937
Comment
Automatic sampling volume proportional samples from open water systems
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
ID: 17938
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Horsøy industrihavn renseanlegg
Horsøyvegen 165
5308 Kleppestø



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
17854
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Håra renseanlegg
5760 Røldal


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
ID: 17709
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Knappen renseanlegg
Bjørgegrend 150
5141 Fyllingsdalen



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
ID: 17937
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
ID: 17938
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Kvernevik renseanlegg
Morvikveien 1
5122 Morvik



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17937
Comment
Automatic sampling volume proportional samples from open water systems
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
ID: 17938
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Notaneset RA
Lundanes 16
5610 Øystese



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17980
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Seljestad renseanlegg
5763 Skare


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
17709
Comment
Method based on automatic sampling volume proportional samples from from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Skjersholmane RA
5412 Stord


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17977
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Stranda renseanlegg
Fugleskjærgata
6905 Florø



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17910
Comment
Automatic sampling volume proportional samples from open water systems.
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Voss renseanlegg
Gjernesmoen 57
5700 Voss



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
11174
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Electromagnetic flow measurement in pressurized system. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Ytre Sandviken renseanlegg
Breiviken 3B
5042 Bergen



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
ID: 17937
Comment
Automatic sampling volume proportional samples from open water systems
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
ID: 17938
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Ytre Skarholmen renseanlegg
Ytre Skarholmen
gnr.10/663 Engevik
Askøy

Remark: Voss renseanlegg - Voss District


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
17852
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Årabrot renseanlegg
Jovegen 60
5514 Haugesund



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
16325
Comment
Method based on automatic sampling volume proportional samples from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
17876
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control