The administrative / geographical unit:
Alvdal RA
Nord-Østerdalsveien 5048,
2560 Alvdal
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Byglandsfjord RA
Vassendfeltet 1
4741 Byglandsfjord
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Bø RA
Slåttunvegen 70
3800 Bø
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet of pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Eidskog RA
Grensevegen 719,
2240 Mangnor
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of Hg
Reference standard
Internal method
Internal method identity
IP-5
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Elstrøm RA
Skotfossvegen 23
3720 Skien
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
IP-5
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Elverum RA
Johan Falkbergetsveg 72,
2407, Elverum
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of Hg
Reference standard
Internal method
Internal method identity
IP-5
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fennefoss RA
Verksvegen 19
4735 Evje
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Flisa RA
Færdervegen 45,
2270 Flisa
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fossbekk RA
Fossbekkveien 30
4790 Lillesand
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fyresdal RA
Klokkarhamaren 16
3870 Fyresdal
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Groos RA
Grooseveien 35
4879 Grimstad
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
IP-5
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Hartevatn RA
Hartevatn Industriområde 11
4755 Hovden
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Heistad RA
Fjordgløttvegen 63
3941Porsgrunn
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet of pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Innbygda RA
Vestsidevegen 85,
2420 Trysil
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of Hg
Reference standard
Internal method
Internal method identity
IP-5
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Kirkenær RA
Haugsgutua 15,
2260 Kirkenær
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Knarrdalsstrand RA
Drangedalsveien 79
3900 Porsgrunn
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
IP-5
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Kongsvinger RA
Carsten E. Rosenvinges veg 9,
2212 Kongsvinger
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Kragerø RA
Ytre Strandvei 15
3770 Kragerø
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Moelv RA
Marisagvegen 20,
2390 Moelv
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Nes RA
Amerikavegen 20,
2350 Nes
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Neset RA
Nidelvveien 10C
4820 Froland
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet of pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Prestestranda RA
Tveitaveien 61
3750 Drangedal
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Ramsflog RA
Tinnesgata 18
3675 Notodden
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Rauland RA
Neslandsvegen 402
3864 Rauland
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Rjukan RA
Bruflot 2
3660 Rjukan
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Salen RA
Ørvikveien 24
3970 Langesund
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Sand RA
Bunesvegen 65,
2120 Sagstua
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Saulekilen RA
Utnesveien 55
4817 His
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
IP-5
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Seljord RA
Mosasida 38
3840 Seljord
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Skarnes RA
Industrivegen 22,
2100 Skarnes
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP2,3,4,6,7,8
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Søvitt RA
Grønvoldvegen 20
3830 Ulefoss
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Tolga RA
Stea 23,
2540 Tolga
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Tynset RA
Tomtegata 65,
2500 Tynset
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Vrådal RA
Vråliosvegen 44
3853 Vrådal
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Vågsli RA
Haukelivegen 4257
3895 Edland
Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Våler RA
Svennebyvegen 155,
2436 Våler
Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
IP-2, IP-3, IP-4, IP-6, IP-7, IP-8, IP-9
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
IP-11
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control