You are here:
Norwegian accreditation

Accreditation scope for

TEST 232

COWI AS

Divisjon vann og miljø

Postboks 6875
0504 Oslo

Telephone: 02694
E-mail: provetaking@cowi.com
Internet: http://www.cowi.no
The laboratory meets the requirements in

NS-EN ISO/IEC 17025:2017




Accreditation includes:
The administrative / geographical unit:
Andebu renseanlegg
Andebuveien 872
3158 Andebu



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Andslimoen renseanlegg
Storegga 10,
9325 Bardufoss



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling of proportional samples from inlet and outlet from free water level in open drain. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
The administrative / geographical unit:
Aspøy renseanlegg
Skutvikskaret 1
6005 Ålesund



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Bårlidalen renseanlegg
Strandsvegen 28
2080 Eidsvoll



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Falkensten renseanlegg
Gamleveien 85
3189 Horten



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Fjellfoten renseanlegg
Velvangveien 27
2150 Årnes



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Gardermoen renseanlegg
Renseveien 84
2060 Gardermoen Næringspark



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Hagelin renseanlegg
Dalabergan 4b,
6511 Kristiansund



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Hessa renseanlegg
Naustberget 49
6006 Ålesund



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Holmestand renseanlegg
Næskildsgate 12
3080 Holmestrand



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-11.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Kløfta renseanlegg
Gislestubben 3
2040 Kløfta



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Lahell renseanlegg
Brøholtstranda 3
3442 Hyggen



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Lillevik renseanlegg
Holmejordetvn. 29
3267 Larvik



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Sandefjord renseanlegg
Enga 7
3231 Sandefjord



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Søbyholmen renseanlegg
Koppstadveien 562,
3178 Våle



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on electromagnetic water flow meter on outlet This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Tønsberg renseanlegg
Carl 15 gate 8A
3150 Tolvsrød



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Vårnes renseanlegg
Storevarveien 220
3159 Melsomvik



Permanent facility
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Sampling in permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control § 14-1.
The administrative / geographical unit:
Øverbygd Renseanlegg
FV87, 100
9325 Bardufoss



Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for analysis of surface active component
Reference standard
Internal Method
Internal method identity
LDBL-142019
Comment
Method based on the eligible sample (manual sampling). This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
LDBL-142019
Comment
Method based on electromagnetic water flow meter on outlet. This is in accordance with the requirements of the Regulations relating to pollution control