You are here:
Norwegian accreditation

Accreditation scope for

TEST 034

Applica Test & Certification AS

Veritasveien 1
1363 HØVIK

Telephone: +47 382 58 777
E-mail: info@applica.no
Internet: http://www.applica.no
The laboratory meets the requirements in

NS-EN ISO/IEC 17025:2017




Accreditation includes:
The administrative / geographical unit:
Avdeling Høvik
Veritasveien 1
1322 HØVIK



Field testing laboratory
P3002 Air sampling
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Stationary source emission
Parameter
Sampling for determination of volume concentration of oxygen (O2)
Reference standard
NS-EN 14789
Internal method identity
ONO-6-AIR-5-i6
Comment
Reference method - Paramagnetism
Object
Stationary source emissions
Parameter
Sampling for determination of the mass concentration of carbon monoxide
Reference standard
NS-EN 15058
Internal method identity
ONO-6-AIR-5-i6
Comment
Reference method: Non-dispersive infrared spectrometry
Object
Stationary source emissions
Parameter
For determination of low range mass concentration of dust
Reference standard
NS-EN 13284-1
Internal method identity
ONO-6AIR-5-i11
Comment
Manual gravimetric method
Object
Stationary source emissions
Parameter
For mass concentration of gaseous chlorides expressed as HCl
Reference standard
NS-EN 1911
Internal method identity
ONO-6-AIR-5-i3
Comment
Standard reference method
Object
Stationary source emissions
Parameter
For determination of the concentration of total mercury
Reference standard
EN 13211
Internal method identity
ONO-6-AIR-5-i4
Comment
Object
Stationary source emissions
Parameter
For measurement of velocity and volume flowrate of gas streams in ducts
Reference standard
ISO 10780
Internal method identity
ONO-6-AIR-5-i18
Comment
Object
Stationary source emissions
Parameter
Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
Reference standard
EN 14385
Internal method identity
ONO-6-AIR-5-i11
Comment
Object
Stationary source emissions
Parameter
For determination of gaseous fluoride content
Reference standard
ISO 15713
Internal method identity
ONO-6-AIR-5-i3
Comment
Object
Stationary source emissions
Parameter
For determination of gas and particle-phase polycyclic aromatic hydrocarbons (PAH). Part 1: Sampling
Reference standard
ISO 11338-1
Internal method identity
ONO-6-AIR-5-i5
Comment
Object
Stationary source emissions
Parameter
For determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
Reference standard
EN 1948-1
Internal method identity
ONO-6-AIR-5-i5
Comment
The reference standards for the determination of gas and particle phase polycyclic aromatic hydrocarbons is ISO 11338-1:2003. The difference between EN 1948-1 and ISO 11338 regarding PAH is adressed in ONO-6-AIR-5-i5
Object
Stationary source emissions
Parameter
Determination of the mass concentration of total gaseous organic carbon
Reference standard
NS-EN 12619
Internal method identity
ONO-6-AIR-5-i14
Comment
At low concentrations in flue gases- Continuous flame ionisation detector method
Object
Stationary source emissions
Parameter
Sampling, for determination of mass concentration of sulphur dioxide
Reference standard
NS-EN 14791
Internal method identity
ONO-6-AIR-5-i3
Comment
Object
Stationary source emissions
Parameter
Sampling for determination of mass concentration of nitrogen oxides (NOx)
Reference standard
NS-EN 14792
Internal method identity
ONO-6-AIR-5-i6
Comment
Reference method: Chemiluminescence
Object
Stationary source emissions
Parameter
Determination of the water vapour in ducts
Reference standard
NS-EN 14790
Internal method identity
ONO-6-AIR-5-i2
Comment
Messurement area: 4-40%
Object
Stationary source emissions
Parameter
Determination of the mass concentration of individual gaseous organic compounds
Reference standard
CEN/TS 13649
Internal method identity
ONO-6-AIR-5-i7
Comment
Activated carbon and solvent desorption method
Permanent facility
P06 EMC
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Burglar alarm equipment
Parameter
Product standard
Reference standard
EN 50130-4
Internal method identity
ONO-6-ALA-5-i1
Comment
Including A1:2014
Object
Electrical / electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
Reference standard
EN 61000-6-2
Internal method identity
ONO-6 EMC-5-i15
Comment
Includes EN 61000-6-2:2005 and IEC 61000-6-2:2016
Object
Electrical and electronic equipment
Parameter
Limitation of voltage changes, voltage fluctuations and flicker
Reference standard
EN 61000-3-3
Internal method identity
ONO-6-EMC-5-i5
Comment
Object
Electrical and electronic installations in ships
Parameter
Electromagnetic compatibility (EMC) - Ships with a metallic hull
Reference standard
IEC 60533
Internal method identity
ONO-6-EMC-5ix
Comment
Corresponds to NEK IEC 60533:2015 and refers to IEC 60945
Object
Electrical and electronical equipment
Parameter
Limits for harmonic current emissions
Reference standard
EN 61000-3-2
Internal method identity
ONO-6-EMC-5-i4
Comment
Object
Electrical/ electronic equipment
Parameter
Electromagnetic compatibility of multimedia equipment - Immunity requirements
Reference standard
EN 55035
Internal method identity
ONO-6-EMC-5-i13 ONO-6-EMC-5-i16 ONO-6-EMC-5-i15 ONO-6-EMC-5-i19 ONO-6-EMC-5-i14 ONO-6-EMC-5-i17 ONO-6-EMC-5-i20
Comment
Electromagnetic compatibility. Excluded: Broadband impulsive conducted disturbances
Object
Electrical/electronic equipment
Parameter
Environmental testing - Part 1: General and guidance
Reference standard
IEC 60068-1
Internal method identity
Comment
Including A1 (1992) Standards that are based on or referring to the reference standard is covered
Object
Electrical/electronic equipment
Parameter
Immunity to electrostatic discharge (ESD)
Reference standard
IEC 61000-4-2
Internal method identity
ONO-6-EMC-5-i13
Comment
Object
Electrical/electronic equipment
Parameter
Electrical fast transient/burst immunity test
Reference standard
IEC 61000-4-4
Internal method identity
ONO-6-EMC-5-i14
Comment
Object
Electrical/electronic equipment
Parameter
Surge immunity test
Reference standard
IEC 61000-4-5
Internal method identity
ONO-6-EMC-5-i17
Comment
Object
Electrical/electronic equipment
Parameter
Immunity to conducted disturbances, induced by radio-frequency fields
Reference standard
IEC 61000-4-6
Internal method identity
ONO-6-EMC-5-i16
Comment
Object
Electrical/electronic equipment
Parameter
Power frequency magnetic field immunity test
Reference standard
IEC 61000-4-8
Internal method identity
ONO-6-EMC-5-i19
Comment
Object
Electrical/electronic equipment
Parameter
Voltage dips, short interruptions and voltage variations immunity tests
Reference standard
IEC 61000-4-11
Internal method identity
ONO-6-EMC-5-i20
Comment
Object
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
Reference standard
EN 61000-6-3
Internal method identity
ONO-6-EMC-5-i28 ONO-6-EMC-5-i29
Comment
Corresponding to IEC 61000-6-3
Object
Electrical/electronical equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
Reference standard
EN 61000-6-1
Internal method identity
ONO-6 EMC-5-i15
Comment
Object
Electrical/electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Reference standard
IEC 61000-4-3
Internal method identity
ONO-6-EMC-5-i15
Comment
Object
Electrical/electronic equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
MIL-STD-461E
Internal method identity
ONO-6-EMC-5-i18
Comment
RE 101, RE 102 (from 30MHz to 18GHz) RS 101, RS 103 (Up to 18GHz and up to 50V/m), CS 101, CS 109, CS114, CS 115, CS116, CE 101, CE 102
Object
Electrical/electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Reference standard
Internal methods
Internal method identity
ONO-6-EMC-5-i15
Comment
Object
Electrical/electronic equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
MIL-STD-461F
Internal method identity
ONO-6-EMC-5-i23
Comment
RE 101, RE 102 (from 30MHz to 18GHz) RS 101, RS 103 (Up to 18GHz and up to 50V/m), CS 101, CS106, CS109, CS114, CS 115, CS116, CE 101, CE 102
Object
Electrical/electronical equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
Reference standard
EN 61000-6-4
Internal method identity
ONO-EMC-5-i28 ONO-EMC-5-i29
Comment
Object
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.
Reference standard
MIL-STD-461G
Internal method identity
MIL-STD-461G
Comment
RE101, RE102, RE103, RS101, RS103, CS101, CS109, CS114, CS 115, CS116, CS118, CE 101, CE 102
Object
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
NATO-AECTP-500
Internal method identity
ONO-6-EMC-5-i36
Comment
Electromagnetic Environmental Effects Tests and verification Edition E Version 1 December 2016 - Category 501: Equipment and Subsystem testing. NCE01 NCE02 NCE04 NCS01 NCS02 NCS06 NCS07 NCS08 NCS09 NCS12 NRE01 NRE02 NRS01 NRS02
Object
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
MIL-STD-1275E
Internal method identity
ONO-6-EMC-5-i35
Comment
Characteristics of 28 Volt DC Input Power to Utilization Equipment in Military Vehicles
Object
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
MIL-STD-704F
Internal method identity
ONO-6-EMC-5-i34
Comment
Aircraft Electric Power Characteristics. Test methods LDC 101 - LDC 602 as specified in MIL-HDBK-704-8. Limited to 28 VDC powered equipment
Object
Information technology equipment
Parameter
Immunity characteristics - Limits and methods of measurement
Reference standard
EN 55024
Internal method identity
ONO-6 EMC-5-i15
Comment
Object
Maritime navigation and radiocommunication equipment and systems
Parameter
General requirements - Methods of testing and required test results
Reference standard
IEC 60945
Internal method identity
ONO-6-EMC-5-ix
Comment
EMC testing according to clause 9 & 10 of the standard
Object
Multimedia equipment
Parameter
Electromagnetic compatibility
Reference standard
EN 55032
Internal method identity
ONO-6-EMC-5-i28 ONO-6-EMC-5-i29
Comment
Emission requirements (EN 55032:2015 og EN 55032:2012). The accreditation does not include testing of TV, FM og satellite.
Object
Product standard for: Fire Detection and Fire Alarm systems
Parameter
Part 4: Power Supply Equipment
Reference standard
EN 54-4
Internal method identity
ONO-6-ALA-5-i3
Comment
EMC testing according to clause 9.9 - 9.13 of the standard. Including A1 (2002) and A2 (2006)
Object
Product standard for: Fire Detection and Fire Alarm systems Product standard for: Fire Detection and Fire Alarm systems
Parameter
Part 2: Control and indicating equipment
Reference standard
EN 54-2
Internal method identity
ONO-6-ALA-5-i3
Comment
EMC testing according to clause 15.8 - 15.13 of the standard. Including AC (1999)
Object
Test specification for Type Approval
Parameter
Methods of testing and required results
Reference standard
International Association of Classification Societies (IACS) E10
Internal method identity
ONO-6-EMC-5-ix series
Comment
Covers e.g. DNV 2.4 and DNVGL-CG-0339
P17 Environment
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Alarmsystems
Parameter
Immunity requirements for components of fire, intruder and social alarm systems
Reference standard
EN 50130-5
Internal method identity
ON0-6-ALA-5-il
Comment
Object
Electrical/electronic and mechanical equipment
Parameter
Storage test temperature range -70°C to + 180°C
Reference standard
EN 60068-2-48
Internal method identity
ONO-6-ENV-5-i12
Comment
Methods based on IEC 60068-2-48 (1982)
Object
Electrical/electronic and mechanical equipment
Parameter
Damp heat, Cyclic
Reference standard
EN 60068-2-30
Internal method identity
ONO-6-ENV-5-i7 & ONO-6-ENV-5-i12
Comment
Standards that are based on or referring to the reference standard is covered
Object
Electronical/electronic equimpment
Parameter
Shock
Reference standard
IEC 60068-2-27
Internal method identity
ONO-6-ENV-5-i12 & ONO-6-ENV-5-i13
Comment
Standards that are based on or referring to the reference standard is covered Peak acceleration: 5 – 2000 g Pulse duration: 1 - 20 ms
Object
Electrical/electronic equipment
Parameter
Salt mist
Reference standard
IEC 60068-2-11
Internal method identity
ONO-6-ENV-5-i12
Comment
Includning Cor 1 (1999) Standards that are based on or referring to the reference standard is covered Volume of test chamber: 2000 l
Object
Electronical/electronic equipment
Parameter
Salt mist, cyclic (sodium, chloride solution)
Reference standard
IEC 60068-2-52
Internal method identity
ONO-6-ENV-5-i9 & ONO-6-ENV-5-i12
Comment
Standards that are based on or referring to the reference standard is covered Volume of test chamber: 2000 l
Object
Electrical/electronic equipment
Parameter
Rough handling shocks, primarily for equipment-type specimens
Reference standard
IEC 60068-2-31
Internal method identity
ONO-6-ENV-5-i12
Comment
Including A1 (1982) Standards that are based on or referring to standard is covered
Object
Electrical/electronic equipment
Parameter
Hammer tests
Reference standard
IEC 60068-2-75
Internal method identity
ONO-6-ENV-5-i6
Comment
Test Ehb: Impact energy level: 0,5J, 0,7J and 1,0J
Object
Electrical/electronical equipment
Parameter
Vibration (sinusoidal) equipment
Reference standard
IEC 60068-2-6
Internal method identity
ONO-6-ENV-5-i12 & ONO-6-ENV-5-i13
Comment
Including Cor.1: 1993 Standards that are based on or lab-S-7 referring to the reference standard is covered
Object
Electrical/electronic equipment
Parameter
Degrees of protection provided by enclosures (IP Code)
Reference standard
EN 60529
Internal method identity
ONO-6-ENV-5-i11 & ONO-6-ENV-5-i12
Comment
Standards that are based on or referring to the reference standard is covered
Object
Electrical/electronic equipment
Parameter
Enviromental testing according to MIL-STD 810 F
Reference standard
Intern metode
Internal method identity
ONO-6-ENV-5-i21
Comment
Method based on MIL-STD 810 F
Object
Electrical/Electronic equipment
Parameter
Enviromental testing
Reference standard
MIL-STD-810H
Internal method identity
ONO-6-ENV-5-i21
Comment
The accreditation scope is limited to the following: - Method 500.6 - Low pressure - Method 501.7 - High Temperature - Method 502.7 - Low temperature - Method 503.7 - Temperature Shock - Method 506.6 - Rain - Method 507.6 - Humidity - Method 509.7 - Salt fog - Method 512.6 - Immersion - Method 514.8 - Vibration - Method 516.8 - Shock - Method 528.1 - vibration of shipboard equipment
Object
Electrical/electronic equipment
Parameter
Vibration, broadband random and guidance
Reference standard
IEC 60068-2-64
Internal method identity
ONO-6-ENV-5-i21 ONO-6-ENV-5-i12 ONO-6-ENV-5-i13
Comment
Object
Electrical and electronic equipment
Parameter
Dry heat
Reference standard
EN 60068-2-2
Internal method identity
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Comment
Including A1 (1993) and A2 (1994) Standards that are based on or referring to standard is covered
Object
Electrical/electronic equipment
Parameter
Temperature, Cold
Reference standard
IEC 60068-2-1
Internal method identity
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Comment
Including A1 (1993) and A2 (1994). Standards that are based on or referring to standard is covered
Object
Electrical/electronical equipment
Parameter
Change of temperature
Reference standard
IEC 60068-2-14
Internal method identity
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Comment
Including A1 (1986) Standards that are based on or referring to standard is covered
Object
Elecrical/electronic equipment
Parameter
Test Cab: Damp heat, steady state
Reference standard
EN 60068-2-78
Internal method identity
ONO-6-ENV-5-i7 ONO-6-ENV-5-i12
Comment
Standards that are based on or referring to standard is covered
Object
Fire detection and fire alarm systems
Parameter
Product standard
Reference standard
EN 54-2
Internal method identity
ONO-6-ALA-5-i3
Comment
Including AC (1999) Standards that are based on or referring to the reference standard is covered. Testing according to clause 9.5-9.8 and 9.14-9.15
Object
Fire detection and fire alarm systems
Parameter
Product standard
Reference standard
EN 54-4
Internal method identity
ONO-6-ALA-5-i3
Comment
Standards that are based on or referring to the reference standard is covered
Object
Maritime navigation and radiocommunication equipment and systems
Parameter
Methods of testing and required test results
Reference standard
EN 60945
Internal method identity
ONO-6-ENV-5-i18
Comment
Testing according to clause 8, 11 & 12 of the standard. Corresponding to IEC 60945
P18 Behaviour
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Alarm system - Intrusion and hold up systems
Parameter
Roles for alarm transmission systems - Intrusion alarm
Reference standard
SSF 114
Internal method identity
ONO-6-ALA-5-i1
Comment
(utg 2)
Object
Alarm system - Intrusion and hold-up systems
Parameter
Forsikring & pension - Automatiske indbrudsalarmanlegg
Reference standard
AIA - katalogen
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm system- intrusion and hold-up systems
Parameter
Requirements for combined passive infrared and microwave detectors
Reference standard
EN 50131-2-4
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems
Parameter
Intrusion and hold-up systems
Reference standard
EN 50131-10
Internal method identity
ONO-6-ALA-5-i1
Comment
2014
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for Receiving Centre Transceiver (RCT)
Reference standard
EN 50136-3
Internal method identity
ONO-6-ALA-5i1
Comment
Specification of the minimum equipment requirements for the performance, reliability, resilience, security and safety characteristics of the receiving centre transceiver (RCT) installed in ARC and used in alarm transmission systems.
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for the performance, reliability and security characteristics of the alarm transmission systems
Reference standard
EN 50136-1
Internal method identity
ON0-6-ALA-5-i1
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT)
Reference standard
EN 50136-2
Internal method identity
ON0-6-ALA-5-i3
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
General requirements for alarm transmission systems
Reference standard
EN 50136-1-1
Internal method identity
ONO-6-ALA-5-i1
Comment
(1998) Including A1 (2001) and A2 (2008)
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
General requirements for alarm transmission equipment
Reference standard
EN 50136-2-1
Internal method identity
ONO-6-ALA-5-i1
Comment
(1998) Including A1 (2001)
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for systems using dedicated alarm paths
Reference standard
EN 50136-1-2
Internal method identity
ONO-6-ALA-5-i1
Comment
(1998)
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for systems with digital communicators using the public switched telephone network
Reference standard
EN 50136-1-3
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for systems with voice communicators using the public switched telephone network
Reference standard
EN 50136-1-4
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for equipment used in systems with digital communicators using the public switched telephone network
Reference standard
EN 50136-2-3
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for equipment used in systems using dedicated alarm paths
Reference standard
EN 50136-2-2
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for equipment used in systems with voice communicators using the public switched telephone network
Reference standard
EN 50136-2-4
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Alarm transmission systems and equipment
Parameter
Requirements for Packet Switched Network PSN
Reference standard
EN 50136-1-5
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion and hold-up systems
Parameter
System requirements
Reference standard
EN 50131-1
Internal method identity
ONO-6-ALA-5-i1
Comment
(2006) Including A1 (2009)
Object
Alarm systems - Intrusion and hold-up systems
Parameter
Opening contacts (magnetic)
Reference standard
EN 50131-2-6
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion and hold-up systems
Parameter
Requirements for microwave detectors
Reference standard
EN 50131-2-3
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion and hold-up systems
Parameter
System components - Intruder alarm systems - Requirements and test methods
Reference standard
SSF 1014
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion and hold-up systems
Parameter
Security fog device/systems
Reference standard
EN 50131-8
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion and hold-up systems
Parameter
Control and indicating equipment
Reference standard
EN 50131-3
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion and hold-up systems
Parameter
Warning devices
Reference standard
EN 50131-4
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Alarm systems - Intrusion systems
Parameter
Power supplies
Reference standard
EN 50131-6
Internal method identity
ONO-6-ALA-5-i1
Comment
Including A1:2014
Object
Alarm systems - Intrusion systems
Parameter
Requirements for interconnections equipment using radio frequency techniques
Reference standard
EN 50131-5-3
Internal method identity
ONO-6-ALA-5-i1
Comment
Object
Fire detection and fire alarm systems
Parameter
Compatibility assessment of system components
Reference standard
EN 54-13
Internal method identity
ONO-ALA-5-i1
Comment
Object
Fire detection and fire alarm systems
Parameter
Equipment
Reference standard
SBF 1421
Internal method identity
ONO-6-ALA-5-i3
Comment
Object
Fire detection and fire alarm systems
Parameter
Alarm transmission and fault warning routing equipment
Reference standard
EN 54-21
Internal method identity
ONO-6-ALA-5-i3
Comment
Object
Fire detection and fire alarm systems
Parameter
Control and indicating equipment
Reference standard
EN 54-2
Internal method identity
ONO-6-ALA-5-i3
Comment
(1997) Including AC (1999) and A1(2006)
Object
Fire detection and fire alarm systems
Parameter
Power supply equipment
Reference standard
EN 54-4
Internal method identity
ONO-6-ALA-5-i3
Comment
(1997) Including A1 (2002) and A2 (2006)
Object
Fire detection and fire alarm systems - Input/output devices
Parameter
Functional requirments
Reference standard
EN 54-18
Internal method identity
ONO-6-ALA-5-i3
Comment
Object
Fire detection and fire alarm systems. Short-circuit isolators
Parameter
Functional requirements
Reference standard
EN 54-17
Internal method identity
ONO-6-ALA-5-i3
Comment
Object
Intrusion and hold-up systems
Parameter
Requirements for passive infrared detectors
Reference standard
EN 50131-2-2
Internal method identity
ONO-6-ALA-5-i1
Comment
(2008)
The administrative / geographical unit:
Avdeling Mandal
Doneheia 17
4516 Mandal



Permanent facility
P06 EMC
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Electrical and electronic installations in ships
Parameter
Electromagnetic compatibility (EMC) - Ships with a metallic hull
Reference standard
IEC 60533
Internal method identity
Selection of basic tests
Comment
Corresponds to NEK IEC 60533:2015 and refers to IEC 60945
Object
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
Reference standard
EN 61000-6-4
Internal method identity
Selection of basic tests
Comment
Corresponding to IEC 61000-6-4
Object
Electrical/electronic equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
MIL-STD-461F
Internal method identity
MIL-STD 461 RE101/ RE102/ RS101/ RS103/ CS101/ CS106/ CS114/ CS115/ CS116/ CE101/ CE102
Comment
RE101/ RE102/ RS101/ RS103/ CS101/ CS106/ CS114/ CS115/ CS116/ CE101/ CE102
Object
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
Reference standard
EN 61000-6-3
Internal method identity
Selection of basic tests
Comment
Corresponding to IEC 61000-6-3
Object
Electrical/electronic equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (EMI)
Reference standard
MIL-STD-461E
Internal method identity
MIL-STD 461 RE101/ RE102/ RS101/ RS103/ CS101/ CS106/ CS114/ CS115/ CS116/ CE101/ CE102
Comment
RE101/ RE102/ RS101/ RS103/ CS101/ CS106/ CS114/ CS115/ CS116/ CE101/ CE102
Object
Electrical/electronic equipment
Parameter
Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
Reference standard
EN 61000-6-1
Internal method identity
Selection of basic tests
Comment
Corresponding to IEC 61000-6-1
Object
Electrical/electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Reference standard
IEC 61000-4-3
Internal method identity
TP-C-Radiated immunity
Comment
Object
Electrical/electronic equipment
Parameter
Power frequency magnetic field immunity test
Reference standard
IEC 61000-4-8
Internal method identity
TP-C-Power-frequency magnetic field
Comment
Object
Electrical/electronic equipment
Parameter
Voltage dips, short interruptions and voltage variations immunity tests
Reference standard
IEC 61000-4-11
Internal method identity
TP-C-Voltage dips and interruptions
Comment
Object
Electrical/electronic equipment
Parameter
Surge immunity test
Reference standard
IEC 61000-4-5
Internal method identity
TP-C-Slow transient (surge)
Comment
Object
Electrical/electronic equipment
Parameter
Immunity to conducted disturbances, induced by radio-frequency fields
Reference standard
IEC 61000-4-6
Internal method identity
TP-C-Conducted rf immunity
Comment
Object
Electrical/electronic equipment
Parameter
Immunity to electrostatic discharge (ESD)
Reference standard
IEC 61000-4-2
Internal method identity
TP-C-Electrostatic discharge (ESD)
Comment
Object
Electrical/electronic equipment
Parameter
Electrical fast transient/burst immunity test
Reference standard
IEC 61000-4-4
Internal method identity
TP-C-Fast transient (burst)
Comment
Object
Electrical/electronical equipment
Parameter
Generic standards - Immunity standard for industrial environments
Reference standard
EN 61000-6-2
Internal method identity
Selection of basic tests
Comment
Includes EN 61000-6-2:2005 and IEC 61000-6-2:2016
Object
Electrical/electronical equipment
Parameter
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.
Reference standard
MIL-STD-461G
Internal method identity
RE101, RE102, RE103, RS101, RS103, CS101, CS114, CS 115, CS116, CS118, CE101, CE102
Comment
RE101, RE102, RE103, RS101, RS103, CS101, CS114, CS 115, CS116, CS118, CE101, CE102
Object
Industrial, scientific and medical (ISM) radio-frequency equipment
Parameter
Radio disturbance characteristics - Limits and methods of measurement
Reference standard
EN 55011
Internal method identity
Selection of basic tests
Comment
Corresponding to IEC 55011
Object
Information technology equipment
Parameter
Immunity characteristics - Limits and methods of measurement
Reference standard
EN 55024
Internal method identity
Selection of basic tests
Comment
Corresponding to IEC 55024
Object
Maritime navigation and radiocommunication equipment and systems
Parameter
Methods of testing and required test results
Reference standard
IEC 60945
Internal method identity
Selection of basic tests
Comment
EMC testing according to clause 9 & 10 of the standard
Object
Multimedia equipment
Parameter
Electromagnetic compatibility
Reference standard
EN 55032
Internal method identity
Selection of basic tests
Comment
Emission requirements. Corresponding to CISPR 32:2012. Does not inklude Annex C.3.7, C.3.8, C.4.2, C.4.3 & Annex H
Object
Test specification for Type Approval
Parameter
Methods of testing and required results
Reference standard
International Association of Classification Societies (IACS) E10
Internal method identity
Selection of basic tests
Comment
Covers e.g. DNV 2.4 and DNVGL-CG-0339