You are here:
Norwegian accreditation

Accreditation scope for

TEST 033

Nemko Scandinavia AS

Postboks 91
1325 Lysaker

Telephone: +47 22 96 03 30
E-mail: info@nemko.com
Internet: http://www.nemko.com
The laboratory meets the requirements in

NS-EN ISO/IEC 17025:2017




Accreditation includes:
Hide all Show all
The administrative / geographical unit:
Permanent laboratory, Kjeller
Instituttveien 6
2007 Kjeller


Permanent facility
P05 Electrical testing
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Broadband Radio Access Networks (BRAN)
Parameter
Radio characteristics
Reference standard
EN 301 893
Internal method identity
TM-NO/WLS/500
Comment
ETSI - 5 GHz RLAN. Do not include DFS testing.
Object
Cordless audio devices
Parameter
Radio characteristics
Reference standard
EN 301 357
Internal method identity
TM-NO/WLS/500
Comment
ETSI - 25 MHz to 2 000 MHz
Object
DECT - Telephony
Parameter
Acoustical tests, protocol tests
Reference standard
TBR 10
Internal method identity
TM-NO/WLS/402
Comment
CAT-iq, CS03 part V, ITU-p.370, EN 300 176-2 (CAT-iq Audio, HAC and ROLR)
Object
DECT - GAP
Parameter
Protocol tests
Reference standard
TBR 22
Internal method identity
TM-NO/WLS/403
Comment
Object
Digital Enhanced Cordless Telecommunications (DECT)
Parameter
Speech and audio coding and transmission
Reference standard
EN 300175-8
Internal method identity
TM-NO/WLS/402
Comment
ETSI
Object
Digital Enhanced Cordless Telecommunications (DECT)
Parameter
Radio characteristics
Reference standard
EN 301 406
Internal method identity
TM-NO/WLS/401
Comment
ETSI CAT-iq RF test, spec. CAT-iq 2.0
Object
Ground-based VHF hand-held, mobile and fixed radio transmitters
Parameter
Receivers and transceivers for the VHF aeronautical mobile service
Reference standard
EN 300 676-2
Internal method identity
TM-NO/WLS/500
Comment
ETSI - amplitude modulation
Object
Land Mobile Service Radio Equipment for use in a Paging Service
Parameter
Radio characteristics
Reference standard
EN 300 224
Internal method identity
Comment
ETSI - frequency range 25 MHz - 470 MHz
Object
Land Mobile Service; Radio equipment using integral antennas
Parameter
Radio characteristics
Reference standard
EN 300 296
Internal method identity
TM-NO/WLS/500
Comment
ETSI
Object
Landmobile service, analogue speech
Parameter
Radio characteristics
Reference standard
EN 300 086
Internal method identity
TM-NO/WLS/500
Comment
ETSI - Radio equipment with an internal or external RF
Object
Radio equipment - VHF aeronautical mobile service
Parameter
Radio characteristics
Reference standard
EN 300 676-1
Internal method identity
TM-NO/WLS/500
Comment
ETSI
Object
Radio equipment intended for the transmission of data using constant or non-constant envelope modulation and having an antenna connector
Parameter
Radio characteristics
Reference standard
EN 300 113
Internal method identity
TM-NO/WLS/500
Comment
ETSI
Object
Radio equipment transmitting signals to initiate a specific response in the receiver
Parameter
Radio characteristics
Reference standard
EN 300 219
Internal method identity
TM-NO/WLS/500
Comment
ETSI
Object
Short Range Devices (SRD)
Parameter
Radio characteristics
Reference standard
EN 300 330
Internal method identity
TM-NO/WLS/500
Comment
ETSI - Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz
Object
Short Range Devices (SRD)
Parameter
Radio characteristics
Reference standard
EN 300 220
Internal method identity
TM-NO/WLS/500
Comment
ETSI - frequency range 25 MHz to 1000 MHz
Object
Short Range Devices (SRD); Radio equipment
Parameter
Radio characteristics
Reference standard
EN 300 440
Internal method identity
TM-NO/WLS/500
Comment
ETSI - 1 GHz to 40 GHz frequency range
Object
Telecom. equipment - analogue access - voice
Parameter
Acoustical tests
Reference standard
TBR 38
Internal method identity
COMLAB 1029
Comment
Object
Telecom. equipment - analogue access non-voice
Parameter
Physical tests
Reference standard
TBR 21
Internal method identity
COMLAB 1027
Comment
Also includ. ES201187, ES201729 and ES203021 -1 , 2 & 3
Object
Terminals for connection to analogue interfaces of the Telephone Networks
Parameter
Physical tests
Reference standard
ETSI ES 103 021-1,-2,-3
Internal method identity
COMLAB 1027
Comment
Object
Ultra-High Frequency (UHF) on-board vessels communications systems and equipment
Parameter
Radio characteristics
Reference standard
EN 300 720
Internal method identity
TM-NO/WLS/500
Comment
ETSI
Object
VHF radiotelephone equipment for the maritime mobile service
Parameter
Radio characteristics
Reference standard
EN 301 178
Internal method identity
TM-NO/WLS/500
Comment
ETSI - VHF bands, for non-GMDSS applications only
Object
VHF transmitters and receivers
Parameter
Radio characteristics
Reference standard
EN 301 929
Internal method identity
WLS/406
Comment
ETSI - Coast Stations for GMDSS and other applications in the maritime mobile service
Object
Wideband transmission systems
Parameter
Radio characteristics
Reference standard
EN 300 328
Internal method identity
TM-NO/WLS/500
Comment
ETSI - 2,4 GHz ISM band and using wide band modulation techniques
Object
Wireless microphones
Parameter
Radio characteristics
Reference standard
EN 300 422
Internal method identity
TM-NO/WLS/500
Comment
ETSI - 25 MHz to 3 GHz frequency range
P06 EMC
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Aeronautical and aviation services
Parameter
Radio characteristics
Reference standard
FCC Part 87; ANSI C63.26:2015;TIA-603-E
Internal method identity
TM-NO-WLS-404G
Comment
Aeronautical and Aviation Radio Services, FCC Licensed Radio Service Equipment, FCC Part 87
Object
Aeronautical and aviation services
Parameter
Radio characteristics
Reference standard
RSS-141; RSS-GEN
Internal method identity
TM-NO-WLS-404G
Comment
ISED Canada, Aeronautical Radiocommunication Equipment in the Frequency Band 117.975 - 137 MHz
Object
Data communications - Characteristics
Parameter
Maritime navigation and radio communication equipment
Reference standard
IEC 61162-450
Internal method identity
TMNO/MET/540
Comment
Protkolltesting
Object
Digital equipment
Parameter
Radio characteristics
Reference standard
ICES-003; ANSI C63.4
Internal method identity
TM-NO-WLS-404B
Comment
ISED Canada, Information Technology Equpments (Inlcuding Digital Apparatus)
Object
Electrical and electronic equipment
Parameter
Voltage dips, short interruptions and voltage variations immunity tests
Reference standard
EN 61000-4-11
Internal method identity
TM-NO/EMC/411
Comment
Including IEC 61000-4-11
Object
Electrical and electronic equipment
Parameter
Conducted emmisions Telecom ports
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/504
Comment
International version: CISPR 22.
Object
Electrical and electronic equipment
Parameter
Radiated emissions
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/509 TM-NO/EMC/510
Comment
30 MHz - 6 GHz. Including the international version CISPR 22
Object
Electrical and electronic equipment
Parameter
Electrostatic discharge immunity test
Reference standard
EN 61000-4-2
Internal method identity
TM-NO/EMC/402
Comment
Including IEC 61000-4-2
Object
Electrical and electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Reference standard
EN 61000-4-3
Internal method identity
TM-NO/EMC/403
Comment
80 MHz - 6,0 GHz. Includes IEC 61000-4-3
Object
Electrical and electronic equipment
Parameter
Conducted emmisions AC/DC mains port
Reference standard
EN 60945
Internal method identity
TM-NO/EMC/501
Comment
Including IEC 60945
Object
Electrical and electronic equipment
Parameter
Voltage changes, voltage fluctuations and flicker
Reference standard
EN 61000-3-3
Internal method identity
TM-NO/EMC/512
Comment
Including IEC 61000-3-3
Object
Electrical and electronic equipment
Parameter
Surge immunity test
Reference standard
EN 61000-4-5
Internal method identity
TM-NO/EMC/405
Comment
Includes IEC 61000-4-5
Object
Electrical and electronic equipment
Parameter
Immunity to conducted disturbances, induced by radio-frequency fields
Reference standard
EN 61000-4-6
Internal method identity
TM-NO/EMC/406
Comment
Including IEC 61000-4-6
Object
Electrical and electronic equipment
Parameter
Radiated disturbance
Reference standard
CISPR 16-2-3
Internal method identity
TM-NO/EMC/509, TM-NO/EMC/510
Comment
30 MHz - 18 GHz
Object
Electrical and electronical equipment
Parameter
Harmonic current emission
Reference standard
EN 61000-3-2
Internal method identity
TM-NO/EMC/511
Comment
Including IEC 61000-3-2
Object
Electrical devices, except radio transmitters
Parameter
RF emissions
Reference standard
FCC Part 15B; ANSI C63.4:2014
Internal method identity
TM-NO-WLS-404B
Comment
Unintentional Radiators
Object
Electrical devices, except radio transmitters
Parameter
Radiated emissions
Reference standard
FCC Part 15B; ANSI C63.4:2014
Internal method identity
TM-NO/EMC/509, TM-NO/EMC/510
Comment
Unintentional Radiators
Object
Electrical devices, except radio transmitters
Parameter
Conducted emissions, AC/DC main port
Reference standard
FCC Part 15B; ANSI C63.4:2014
Internal method identity
TM-NO/EMC/501
Comment
Unintentional Radiators
Object
Electrical end electronic equipment
Parameter
Electrical fast transient/burst immunity test
Reference standard
EN 61000-4-4
Internal method identity
TM-NO/EMC/404
Comment
Includes IEC 61000-4-4
Object
EPIRB
Parameter
Radio characteristics
Reference standard
RSS-287; RSS-GEN
Internal method identity
TM-NO-WLS-404F
Comment
ISED Canada, Emergency Position Indicating Radio Beacons (EPIRBs), Emergency Locator Transmitters (ELT), Personal Locator Beacons (PLB), and Maritime Survivor Locator Devices (MSLD)
Object
Industrial, scientific and medical equipment
Parameter
Conducted emmisions AC/DC mains port
Reference standard
EN 55011
Internal method identity
TM-NO/EMC/501
Comment
Includes the international version CISPR 11
Object
ISM equipment
Parameter
RF emissions
Reference standard
FCC Part 18; FCC MP-5:February 1986
Internal method identity
TM-NO-WLS-404B
Comment
Industrial Scientific and Medical Equipment, FCC part 18
Object
LE-PCS equipment
Parameter
Radio characteristics
Reference standard
RSS-213; RSS-GEN; ANSI C63.4; ANSI C63.17
Internal method identity
TM-NO-WLS-404D
Comment
ISED Canada, 2 GHz Licence-Exempt Personal Communications Services (LE-PCS) Devices
Object
Licensed radio
Parameter
Radio characteristics
Reference standard
RSS-119; RSS-GEN
Internal method identity
TM-NO-WLS-404H
Comment
ISED Canada, Land Mobile and Fixed Equipment Operating in the Frequency Range 27.41 - 960 MHz
Object
Low power license except transmitters
Parameter
Radio characteristics
Reference standard
RSS 210; RSS-GEN; ANSI C63.10; ANSI C63.4
Internal method identity
TM-NO-WLS-404C
Comment
ISED Canada, License-Exempt Radio Apparatus: Category I Equipment
Object
Low power license except transmitters
Parameter
Radio characteristics
Reference standard
FCC part 15C; ANSI C63.10:2013; ANSI 63.4:2014
Internal method identity
TM-NO-WLS-404C
Comment
Intentional Radiators, 9 kHz to 40 GHz
Object
Low power license except transmitters
Parameter
Radio characteristics
Reference standard
RSS-247; RSS-GEN; ANSI C63.4; ANSI C63.10
Internal method identity
TM-NO-WLS-404C/E
Comment
ISED Canada, Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Except Local Area Network (LE-LAN) Devices
Object
Low power licensed equipment
Parameter
Radio characteristics
Reference standard
RSS-123; RSS-GEN
Internal method identity
TM-NO-WLS-404H
Comment
Licensed Low-Power Radio Apparatus
Object
Maritime equipment
Parameter
Radio characteristics
Reference standard
FCC Part 80; ANSI C63.26:2015; TIA-603-E
Internal method identity
TM-NO-WLS-404F
Comment
Maritime Radio Services - FCC Part 80
Object
Maritime navigation and radiocommunication equipment and systems
Parameter
Radiated Disturbance
Reference standard
IEC 60945
Internal method identity
TM-NO/EMC/509
Comment
30 - 2000 MHz Including IEC 60945
Object
Maritime radio transmitters
Parameter
Radio characteristics
Reference standard
RSS-117; RSS-GEN
Internal method identity
TM-NO-WLS-404F
Comment
ISED Canada, Land anc Coast Station Transmitters Operating in the Band 200 - 535 kHz
Object
Maritime VHF equipment
Parameter
Radio characteristics
Reference standard
RSS-182; RSS-GEN
Internal method identity
TM-NO-WLS-404F
Comment
ISED Canada, Maritime Radio Transmitters and Receivers in the Band 156-162.5 MHz
Object
Medical electrical equipment
Parameter
Electromagnetic compatibility
Reference standard
EN 60601-1-2
Internal method identity
TMNO/EMC/903
Comment
Includes IEC 60601-1-2
Object
Multimedia Equipment
Parameter
Electromagnetic compatibility - immunity
Reference standard
EN 55035
Internal method identity
TM-NO/EMC/904
Comment
International version: CISPR 35. Excluded: broadband impulse noise immunity, and surge immunity (10/700 µsec impulses
Object
Multimedia equipment
Parameter
Electromagnetic compatibility
Reference standard
EN 55032
Internal method identity
TMNO/EMC/500
Comment
International version: CISPR 32. Does not include testing of TV, FM or Satellite receivers
Object
Radio Apparatus
Parameter
Radio characteristics
Reference standard
RSS-GEN; ANSI C63.4; ANSI 63.10
Internal method identity
TM-NO-WLS-404C/D/E
Comment
ISED Canada, General Requirements for Compliance of Radio Apparatus
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-1
Internal method identity
TM-NO/EMC/905
Comment
Excluded: 1) Conducted emissions on PLC Ports 2) Immunity to transients and surges in the vehicular environment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-3
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-5
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-6
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-9
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-12
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-17
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-19
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-20
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-22
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Electromagnetic compatibility - electromagnetic emission and immunity
Reference standard
ETSI EN 301 489-34
Internal method identity
TM-NO/EMC/905
Comment
Object
Radio equipment
Parameter
Maritime broadband Radiolinks
Reference standard
ETSI EN 303 276
Internal method identity
TM-NO/WLS/500
Comment
Object
Radio equipment
Parameter
U-NII with DFS Intentional Radiators Unlicensed Devices
Reference standard
ANSI C63.10:2013; FCC Part 15E; KDB 905462 D02
Internal method identity
TM-NO/WLS/404E
Comment
with DFS
Object
Radio equipment
Parameter
Commercial Mobile Service (FCC Licensed Radio Servcie Equipment) Licensed Devices
Reference standard
ANSI C63.26:2015; TIA-603-E
Internal method identity
TM-NO/WLS/404J
Comment
Part 22 (Cellular) Part 24 Part 25 (below 3 GHz) Part 27
Object
Radio equipment
Parameter
General Mobile Service (FCC Licensed Radio Servcie Equipment) Licensed Devices
Reference standard
ANSI C63.26:2015; TIA-603-E
Internal method identity
TM-NO/WLS/404K
Comment
Part 22 (non-cellular) Part 90 (below 3 GHz) Part 95 (below 3 GHz) Part 97 (below 3 GHz) Part 101 (below 3 GHz)
Object
Radio equipment
Parameter
UWB Intentional Radioators (Ultra-wideband Operation) Unlicensed Devices
Reference standard
ANSI C63.10:2013; FCC Part 15F
Internal method identity
TM-NO/WLS/404C
Comment
UWB
Object
Radio equipment
Parameter
Radio Frequency Exposure, Exposure Evaluation
Reference standard
RSS-102
Internal method identity
TM-NO/WLS/404X
Comment
Exposure Evaluation
Object
Radio equipment
Parameter
Radio Frequency Exposure, Exposure Evaluation
Reference standard
RSS-102
Internal method identity
TM-NO/WLS/404X
Comment
Nerve Stimulation; SPR002
Object
Radio equipment
Parameter
License Exempt Devices Ultra-Wideband Devices
Reference standard
RSS-220; RSS-GEN; ANSI C63.10:2013
Internal method identity
TM-NO/WLS/404C
Comment
Object
Radio equipment
Parameter
Licensed Devices Land Mobile and Fixed Equipment Operating in the band 1670-1675 MHz
Reference standard
RSS-112; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Land Mobile and Fixed Equipment Operating in the Frequency Range 27.41 - 960 MHz
Reference standard
RSS-119; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404K
Comment
Object
Radio equipment
Parameter
Licensed Devices Land Mobile and Fixed Equipment Operating in the Frequency Range 1.705 - 30 MHz
Reference standard
RSS-125; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404K
Comment
Object
Radio equipment
Parameter
Licensed Devices Air-Ground Equipment Operating in the bands 849-851 MHz and 894-896 MHz
Reference standard
RSS-127; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404G
Comment
Object
Radio equipment
Parameter
Licensed Devices Equipment Operating in the Frequency Bands 617-652 MHz, 663-698 MHz, 698-756 MHz, 777-787 MHz
Reference standard
RSS-130; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Cellular Telephone Systems Operating in the Bands 824-849 MHz and 869-894 MHz
Reference standard
RSS-132; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices 2 GHz Personal Communication Services
Reference standard
RSS-133; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
License Exempt Devices 900 MHz Narrowband PCS
Reference standard
RSS-134; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
License Exempt Devices Digital Scanner Receivers
Reference standard
RSS-135; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404B
Comment
Object
Radio equipment
Parameter
Licensed Devices Location and Monitoring Service in the Band 902-928 MHz
Reference standard
RSS-137; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404C
Comment
Object
Radio equipment
Parameter
Licensed Devices Advanced Wireless Services (AWS) Operating in the Bands 1710-1780 MHz and 2110-2180 MHz
Reference standard
RSS-139; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Equipment Operating in the Public Safety Broadcast Frequency Bands 758-768 MHz and 788-798 MHz
Reference standard
RSS-140; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Narrowband Multipoint Communication Systems in the Bands 1429.5-1432 MHz
Reference standard
RSS-142; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404K
Comment
Object
Radio equipment
Parameter
Licensed Devices Mobile Earth Stations (MESs) and Ancillary Terrestrual Component (ACT) operating in the Mobile Satellite Service (MSS) Bands
Reference standard
RSS-170; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Flexible Use Broadband Equipment Operating in the Band 3450-3650 MHz
Reference standard
RSS-192; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Wireless Communications Service Equipment Operating in the Bands 2305-2320 MHz and 2345-2360 MHz
Reference standard
RSS-195; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Wireless Broadband Access Equipment Operating in the Band 3650-3700 MHz
Reference standard
RSS-197; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
Licensed Devices Broadband Radio Service (BRS) Equipment Operating in the Band 2500-2590 MHz
Reference standard
RSS-199; RSS-GEN; ANSI C63.26:2015
Internal method identity
TM-NO/WLS/404J
Comment
Object
Radio equipment
Parameter
License Exempt Devices Analogue Scanner Receivers
Reference standard
RSS-215; RSS-GEN; ANSI C63.4:2014
Internal method identity
TM-NO/WLS/404B
Comment
Object
Radio Receivers
Parameter
Radio characteristics
Reference standard
RSS-310; RSS-GEN; ANSI C63.4
Internal method identity
TM-NO-WLS-404B
Comment
ISED Canada, License-Exempt Radio Apparatus: Category II Equipment
Object
UPCS equipment
Parameter
Radio characteristics
Reference standard
FCC Part 15D; ANSI C63.4:2014; ANSI C63.17:2013
Internal method identity
TM-NO-WLS-404D
Comment
UPCS, Unlicensed Personal Communication Systems devices
Object
Wireless Power Transfer equipment
Parameter
Radio characteristics
Reference standard
RSS-216; RSS-GEN; ANSI C63.4
Internal method identity
TM-NO-WLS-404B
Comment
ISED Canada, Wireless Power Transfer Devices
Object
WLAN equipment at 5 GHz
Parameter
Radio characteristics
Reference standard
FCC part 15E; ANSI C63.10:2013; FCC KDB 789033
Internal method identity
TM-NO-WLS-404E
Comment
U-NII without DFS Intentional Radiators
The administrative / geographical unit:
Permanent laboratory, Lysaker
Philip Pedersens v 11
1366 Lysaker


Field testing laboratory
P18 Behaviour
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Fire detection and fire alarm systems
Parameter
Connectivity and connectability assessment
Reference standard
EN 54-13
Internal method identity
TM-NO/FSC/213
Comment
Including EN 54-13:2005 and EN 54-13:2017
Permanent facility
P03 Fire
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Plastic materials
Parameter
Needle flame test
Reference standard
IEC 60695-11-5
Internal method identity
TM-NO /SAF/209
Comment
P05 Electrical testing
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Fire detection and fire alarm systems - Power supply equipment
Parameter
Electrical tests
Reference standard
EN 54-4
Internal method identity
TM-NO/FSC/204
Comment
Clause 9.2 and 9.3
Object
Flat, non-demountable two-pole plugs 2,5 A 250 V with cable for connection to Class 2 apparatus
Parameter
General safety requirements
Reference standard
EN 50075
Internal method identity
TM-NO/COMP/305
Comment
Clause 15.03, chemical analysis of current carrying parts is not accredited
Object
Switches for household and similar fixed electrical installations
Parameter
Particular requirements - Electronic switches
Reference standard
EN 60669-2-1
Internal method identity
Comment
Clause 101.3 short-cut tests and clause 26 EMC are not accredited. Equivalent to IEC 60669-2-1 A1, A2. Clause 22.5, checking of copper content is not accredited
Object
Switches for household and similar permanent installations
Parameter
General safety requirements
Reference standard
EN 60669-1
Internal method identity
Comment
P06 EMC
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Adjustable speed electrical power drive systems
Parameter
EMC testing
Reference standard
EN 61800-3
Internal method identity
Comment
Including IEC 61800-3
Object
Alarm systems
Parameter
Immunity requirements for components of fire, intruder and social alarm systems
Reference standard
EN 50130-4
Internal method identity
Comment
Object
Arc welding equipment
Parameter
Electromagnetic compatibility (EMC) requirements
Reference standard
EN 60974-10
Internal method identity
Comment
Object
Audio, video, audio-visual and entertainment lighting control apparatus for professional use
Parameter
Immunity
Reference standard
EN 55103-2
Internal method identity
Comment
Product family standard
Object
Automatic electrical controls for household and similar use
Parameter
General requirements
Reference standard
EN 60730-1
Internal method identity
Comment
Object
Electrical and electronic equipment
Parameter
Impulse magnetic field immunity test
Reference standard
EN 61000-4-9
Internal method identity
TM-NO/EMC/409
Comment
6.4/1μsec puls
Object
Electrical and electronic equipment
Parameter
Disturbance voltage AC/DC mains port
Reference standard
EN 55015
Internal method identity
TM-NO/EMC/501
Comment
Object
Electrical and electronic equipment
Parameter
Disturbance voltage AC/DC mains port
Reference standard
EN 55015
Internal method identity
TM-NO/EMC/502
Comment
International version: CISPR 15
Object
Electrical and electronic equipment
Parameter
Radiated electromagnetic disturbance
Reference standard
EN 55015
Internal method identity
TM-NO/EMC/506
Comment
International version: CISPR 15
Object
Electrical and electronic equipment
Parameter
Conducted emmisions AC/DC mains port
Reference standard
EN 55014-1
Internal method identity
TM-NO/EMC/501
Comment
International version: CISPR 14-1
Object
Electrical and electronic equipment
Parameter
Discontinuous Conducted emmisions
Reference standard
EN 55014-1
Internal method identity
TM-NO/EMC/505
Comment
Includes Amendment A1 (2001) and Amendment A2 (2002)
Object
Electrical and electronic equipment
Parameter
Conducted emmisions AC/DC output port
Reference standard
EN 55014-1
Internal method identity
TM-NO/EMC/502
Comment
International version: CISPR 14
Object
Electrical and electronic equipment
Parameter
Disturbance power
Reference standard
EN 55014-1
Internal method identity
TM-NO/EMC/507
Comment
International version: CISPR 14-1
Object
Electrical and electronic equipment
Parameter
Surge immunity test
Reference standard
EN 61000-4-5
Internal method identity
TM-NO/EMC/405
Comment
International version: IEC 61000-4-5
Object
Electrical and electronic equipment
Parameter
Immunity to conducted disturbances, induced by radio-frequency fields
Reference standard
EN 61000-4-6
Internal method identity
TM-NO/EMC/406
Comment
Object
Electrical and electronic equipment
Parameter
Radiated disturbance
Reference standard
EN 55011
Internal method identity
TM-NO/EMC/508
Comment
Includes Amendment A1 (1999) and Amendment A2 (2002) 10kHz - 30 MHz
Object
Electrical and electronic equipment
Parameter
Disturbance voltage AC/DC mains port
Reference standard
EN 55011
Internal method identity
TM-NO/EMC/501
Comment
Includes also standards referring to or based on the refrence standard or the international version. International version: CISPR 11
Object
Electrical and electronic equipment
Parameter
Radiated disturbance
Reference standard
EN 60945
Internal method identity
TM-NO/EMC/509 TM-NO/EMC/510
Comment
International version: IEC 60945
Object
Electrical and electronic equipment
Parameter
Radiated disturbance
Reference standard
EN 60945
Internal method identity
TM-NO/EMC/508
Comment
10kHz - 30MHz Including IEC 60945
Object
Electrical and electronic equipment
Parameter
Immunity to voltage dips and interruptions
Reference standard
EN 61000-4-11
Internal method identity
TM-NO/EMC/411
Comment
Inrush <430A
Object
Electrical and electronic equipment
Parameter
Compass safe distance
Reference standard
EN ISO 694
Internal method identity
TM-NO/MET/501
Comment
Object
Electrical and electronic equipment
Parameter
Compass safe distance
Reference standard
EN 60945
Internal method identity
TM-NO/MET/501
Comment
Including IEC 60945
Object
Electrical and electronic equipment
Parameter
Immunity
Reference standard
EN 61000-6-1
Internal method identity
TM-N0/EMC/400
Comment
Includes IEC 61000-6-1
Object
Electrical and electronic equipment
Parameter
Immunity to RF electromagnetic radiation
Reference standard
EN 61000-4-3
Internal method identity
TM-NO/EMC/403
Comment
80 MHz - 6,0 GHz. Includes IEC 61000-4-3
Object
Electrical and electronic equipment
Parameter
Electrostatic discharge immunity test
Reference standard
EN 61000-4-2
Internal method identity
TM-NO/EMC/402
Comment
Includes also standards referring to or based on the reference standard or international version. International version: IEC 61000-4-2
Object
Electrical and electronic equipment
Parameter
Conducted emmisions AC/DC mains port
Reference standard
EN 60945
Internal method identity
TM-NO/EMC/501
Comment
Includes also standards referring to or based on the reference standard or the international version. Includes IEC 60945
Object
Electrical and electronic equipment
Parameter
Generic standards. Emission standard for residential, commercial and light-industrial environments
Reference standard
EN 61000-6-3
Internal method identity
Comment
Object
Electrical and electronic equipment
Parameter
Supply voltage / frequency variations
Reference standard
EN 60945
Internal method identity
TM-NO/EMC/414
Comment
Includes also standards referring to or based on the reference standard or the international version. International version IEC 60945
Object
Electrical and electronic equipment
Parameter
Conducted emmisions Telecom port
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/504
Comment
International version CISPR 22
Object
Electrical and electronic equipment
Parameter
Radiated disturbance
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/509 TM-NO/EMC/510
Comment
International version: CISPR 22
Object
Electrical and electronic equipment
Parameter
Conducted emmisions (AMN)
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/501
Comment
International version: CISPR 22
Object
Electrical and electronic equipment
Parameter
Conducted emmisions (Current probe)
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/503
Comment
International version: CISPR 22. Current probe measurements with line terminated to reference through 150 Ω
Object
Electrical and electronic equipment
Parameter
Immunity to power frequency magnetic fields
Reference standard
EN 61000-4-8
Internal method identity
TM-NO/EMC/408
Comment
50/60 Hz
Object
Electrical and electronical equipment
Parameter
Emission standard for industrial environments
Reference standard
EN 61000-6-4
Internal method identity
Comment
Generic standards
Object
Electrical and electronical equipment
Parameter
Harmonic current emissions
Reference standard
EN 61000-3-2
Internal method identity
TM-NO/EMC/511
Comment
International version: IEC 61000-3-2
Object
Electrical and electronic equipment
Parameter
Voltage changes, voltage fluctuations and flicker
Reference standard
EN 61000-3-3
Internal method identity
TM-NO/EMC/512
Comment
International version: IEC 61000-3-3
Object
Electrical and electronic equipment
Parameter
Radiated disturbance
Reference standard
EN 55011
Internal method identity
TM-NO/EMC/509 TM-NO/EMC/510
Comment
International version: CISPR 11. Frequency range limited to 30 MHz to 6 GHz
Object
Electrical and electronic equipment
Parameter
Electrical fast transient/burst immunity test
Reference standard
EN 61000-4-4
Internal method identity
TM-N0/EMC/404
Comment
International version: IEC 61000-4-4
Object
Electrical devices, except radio transmitters
Parameter
Conducted emissions, AC/DC mains port
Reference standard
FCC Part 15B; ANSI C63.4:2014
Internal method identity
TM-NO/EMC/501
Comment
Unintentional Radiators
Object
Electrical equipment for measurement, control and laboratory use
Parameter
General requirements
Reference standard
EN 61326-1
Internal method identity
Comment
Object
Electrical lighting and similar equipment
Parameter
Disturbance voltage AC/DC mains port
Reference standard
EN 55015
Internal method identity
Comment
Object
Fire alarm devices - Sounders
Parameter
EMC
Reference standard
EN 54-3
Internal method identity
TM-NO/FSC/203
Comment
Clause 5
Object
Fire detection and fire alarm system - Control and indicating equipment
Parameter
EMC testing
Reference standard
EN 54-2
Internal method identity
TM-NO/FSC/202
Comment
Clause 15 Product standard
Object
Fire detection and fire alarm systems - Input/output devices
Parameter
EMC testing
Reference standard
EN 54-18
Internal method identity
TM-NO/FSC/218
Comment
Clause 5 (Excluding clause 5.7 SO2 Corrosion test)
Object
Fire detection and fire alarm systems - Manual call points
Parameter
EMC testing
Reference standard
EN 54-11
Internal method identity
TM-NO/FSC/211
Comment
Excluding clause 5.13 SO2 Corrosion test
Object
Fire detection and fire alarm systems - Power supply equipment
Parameter
EMC testing
Reference standard
EN 54-4
Internal method identity
TM-NO/FSC/204
Comment
Clause 9 Product standard
Object
Fire detection and fire alarm systems – Short-circuit isolators
Parameter
EMC testing
Reference standard
EN 54-17
Internal method identity
TM-NO/FSC/217
Comment
Excluding clause 5.8 SO2 Corrosion test
Object
Fire detection and fire alarm systems, voice alarm control and indicating equipment
Parameter
EMC testing
Reference standard
EN 54-16
Internal method identity
TM-NO/FSC/216
Comment
Object
Household appliances, electric tools and similar apparatus
Parameter
Electromagnetic compatibility
Reference standard
EN 55014-1
Internal method identity
Comment
Object
Household appliances, electric tools and similar apparatus
Parameter
Immunity
Reference standard
EN 55014-2
Internal method identity
Comment
Product family standard
Object
Industrial, scientific and medical equipment
Parameter
Radio-frequency disturbance characteristics - Limits and methods of measurement
Reference standard
EN 55011
Internal method identity
Comment
Frequency range limited to 10 kHz to 6 GHz. Testing of microwave ovens according to clause 5.9 is not part of the scope.
Object
Information technology equipment
Parameter
Emissions
Reference standard
EN 55022
Internal method identity
TM-NO/EMC/500
Comment
Object
Information technology equipment
Parameter
Immunity
Reference standard
EN 55024
Internal method identity
TM-NO/EMC/400
Comment
Object
Lighting equipment
Parameter
EMC immunity requirements
Reference standard
EN 61547
Internal method identity
Comment
Object
Low voltage power supplies, DC output
Parameter
Electromagnetic compatibility (EMC)
Reference standard
EN 61204-3
Internal method identity
Comment
Object
Low-voltage switchgear and controlgear
Parameter
General rules
Reference standard
EN 60947-1
Internal method identity
Comment
Object
Maritime navigation and radiocommunication equipment and systems
Parameter
General requirements - Methods of testing and required test results
Reference standard
EN 60945
Internal method identity
Comment
Including IEC 60945
Object
Medical electrical equipment
Parameter
Electromagnetic compatibility
Reference standard
EN 60601-1-2
Internal method identity
TMNO/EMC/903
Comment
Includes IEC 60601-1-2
Object
Multimedia equipment
Parameter
Electromagnetic compatibility
Reference standard
EN 55032
Internal method identity
TMNO/EMC/500
Comment
International version: CISPR 32. Does not include testing of TV, FM or Satellite receivers
Object
Multimedia Equipment
Parameter
Electromagnetic compatibility - immunity
Reference standard
EN 55035
Internal method identity
TM-NO/EMC/904
Comment
International version: CISPR 35. Excluded: broadband impulse noise immunity, and surge immunity (10/700 µsec impulses
Object
Switches for household and similar fixed electrical installations
Parameter
Particular requirements - Electronic switches
Reference standard
EN 60669-2-1
Internal method identity
Comment
Object
Telecommunication network equipment
Parameter
ElectroMagnetic Compatibility (EMC) requirements
Reference standard
EN 300 386
Internal method identity
Comment
ETSI
P17 Environment
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Electrical and electronic equipment
Parameter
Vibration, broadband random and guidance
Reference standard
IEC 60068-2-64
Internal method identity
TM-NO/REL/508
Comment
Object
Electrical and electronic equipment
Parameter
Test Cab: Damp heat, steady state
Reference standard
IEC 60068-2-78
Internal method identity
TM-NO/REL/504
Comment
Object
Electrical and electronic equipment
Parameter
Cold
Reference standard
EN 60068-2-1
Internal method identity
TM-NO/REL/501
Comment
Test Ad
Object
Electrical and electronic equipment
Parameter
Dry heat
Reference standard
EN 60068-2-2
Internal method identity
TM-NO/REL/502
Comment
Test Bd
Object
Electrical and electronic equipment
Parameter
Ingress protection (IP)
Reference standard
IEC 60529
Internal method identity
TM-NO/REL/505
Comment
Object
Electrical and electronic equipment
Parameter
Vibration (sinusoidal)
Reference standard
IEC 60068-2-6
Internal method identity
TM-NO/REL/508
Comment
Object
Electrical and electronic equipment
Parameter
Shock
Reference standard
IEC 60068-2-27
Internal method identity
TM-NO/REL/509
Comment
Object
Electrical and electronic equipment
Parameter
Salt mist
Reference standard
IEC 60068-2-11
Internal method identity
TM-NO/REL/507
Comment
Object
Electrical and mechanical equipment
Parameter
Salt mist, cyclic (sodium, chloride solution)
Reference standard
IEC 60068-2-52
Internal method identity
TM-NO/REL/506
Comment
Object
Electrical, control and instrumentation equipment, marine computers and peripherals covered by classification
Parameter
Cold, dry heat and damp heat
Reference standard
International Association of Classification Societies (IACS) E10
Internal method identity
TM-NO/REL/501, TM-NO/REL/502, TM-NO/REL/503
Comment
Object
Electrical/electronic and mechanical equipment
Parameter
Damp heat, Cyclic
Reference standard
EN 60068-2-30
Internal method identity
TM-NO/REL/503
Comment
Test Db
Object
Fire detection and fire alarm systems - Control and indicating equipment
Parameter
Environmental tests
Reference standard
EN 54-2
Internal method identity
TM-NO/FSC/202
Comment
Clause 15
Object
Fire detection and fire alarm systems - Input/output devices
Parameter
Environmental tests
Reference standard
NS-EN 54-18
Internal method identity
TM-NO/FSC/218
Comment
Clause 5 (Excluding clause 5.7 SO2 Corrosion test)
Object
Fire detection and fire alarm systems - Manual call points
Parameter
Environmental tests
Reference standard
EN 54-11
Internal method identity
TM-NO/FSC/211
Comment
Excluding clause 5.13 SO2 Corrosion test
Object
Fire detection and fire alarm systems - Power supply equipment
Parameter
Environmental tests
Reference standard
EN 54-4
Internal method identity
TM-NO/FSC/204
Comment
Clause 9
Object
Fire detection and fire alarm systems – Short-circuit isolators
Parameter
Environmental tests
Reference standard
EN 54-17
Internal method identity
TM-NO/FSC/217
Comment
Excluding clause 5.8 SO2 Corrosion test
Object
Fire detection and fire alarm systems - Sounders
Parameter
Enviromental tests
Reference standard
NS-EN 54-3
Internal method identity
TM-NO/FSC/203
Comment
Clause 5
Object
Fire detection and fire alarm systems, voice alarm control and indicating equipment
Parameter
Environmental tests
Reference standard
EN 54-16
Internal method identity
TM-NO/FSC/216
Comment
Object
Maritime navigation and radiocommunication equipment and systems
Parameter
Low temperature Dry heat Damp heat
Reference standard
EN 60945
Internal method identity
TM-NO/REL/501 TM-NO/REL/502 TM-NO/REL/503
Comment
Including IEC 60945
P18 Behaviour
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Fire alarm devices - Sounders
Parameter
Functional requirements
Reference standard
NS-EN 54-3
Internal method identity
TM-NO/FSC/203
Comment
Clauses 4 and 5
Object
Fire detection and fire alarm systems - Control and indicating equipment
Parameter
Functional requirements and design requirements
Reference standard
EN 54-2
Internal method identity
TM-NO/FSC/202
Comment
Clauses 4 to 14
Object
Fire detection and fire alarm systems - Input/output devices
Parameter
Functional requirements
Reference standard
EN 54-18
Internal method identity
TM-NO/FSC/218
Comment
Clauses 4 and 5 (Excluding clause 5.7 SO2 Corrosion test)
Object
Fire detection and fire alarm systems - Manual call points
Parameter
Functional requirements
Reference standard
EN 54-11
Internal method identity
TM-NO/FSC/211
Comment
Excluding clause 5.13 SO2 Corrosion test
Object
Fire detection and fire alarm systems - Power supply equipment
Parameter
Functional requirements
Reference standard
EN 54-4
Internal method identity
TM-NO/FSC/204
Comment
Clauses 4-8
Object
Fire detection and fire alarm systems – Short-circuit isolators
Parameter
Functional requirements
Reference standard
EN 54-17
Internal method identity
TM-NO/FSC/217
Comment
Excluding clause 5.8 SO2 Corrosion test
Object
Fire detection and fire alarm systems, voice alarm control and indicating equipment
Parameter
Functional requirements
Reference standard
EN 54-16
Internal method identity
TM-NO/FSC/216
Comment
P20 Safety
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Ambulatory electrocardiographic systems
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-47
Internal method identity
Comment
Including IEC 60601-2-47
Object
Anaesthetic workstations
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN ISO 80601-2-13
Internal method identity
Comment
Object
Appliance couplers for household and similar general purposes
Parameter
Safety requirements
Reference standard
EN 60320-1
Internal method identity
TM-NO COMP-306
Comment
Including: IEC 60320-1
Object
Appliance couplers for household and similar general purposes
Parameter
Safety requirements
Reference standard
EN 60320-3
Internal method identity
TM-NO COMP-306
Comment
Including: IEC 60320-3
Object
Appliances for heating liquids
Parameter
Safety requirements
Reference standard
EN 60335-2-15
Internal method identity
TM-NO/Hous/201-15
Comment
Including IEC 60335-2-15
Object
Audio, video and similar electronic apparatus
Parameter
Safety requirements
Reference standard
EN 60065
Internal method identity
Comment
Including IEC 60065. Clause 18: Implosion test of CRT (and corresponding clause in IEC 60065) is not included
Object
Audio/video, information and communication technology equipment
Parameter
Safety requirements
Reference standard
EN 62368-1:2014/A11:2017
Internal method identity
TM-NO-ITAV-201
Comment
The following parts of the method are excepted from the evaluation: • clause 10.5 / safeguard against x-radiation • clause 10.6 / safeguard against acoustic energy sources • annex C / UV radiation • annex M.8 / • EIS (electrical insulation system) evaluation according to IEC 60085 as required in clause 5.4.1.4.3 for thermal classifications above Class 105 (A) Including: IEC 62368-1:2018 IEC 62368-1:2014 EN 62368-1:2014+A11:2017
Object
Automated non-invasive sphygmomanometers
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 80601-2-30
Internal method identity
Comment
Including IEC 80601-2-30
Object
Cardiac defibrillators
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-4
Internal method identity
Comment
Including IEC 60601-2-4
Object
Commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
Parameter
Safety requirements
Reference standard
IEC 60335-2-89
Internal method identity
TM-NO/Hous/201-89
Comment
Object
Cord sets and interconnection cord sets
Parameter
Safety requirements
Reference standard
IEC 60799
Internal method identity
TM-NO COMP-307
Comment
Limitation for IEC 60799: only include plug connector with protection degreee IPX0 Including: IEC 60799:2018 IEC 60799:1998 EN 60799:1998
Object
Critical care ventilators
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN ISO 80601-2-12
Internal method identity
Comment
Object
Dental equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 80601-2-60
Internal method identity
Comment
Object
Electrocardiographic monitoring equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-27
Internal method identity
Comment
Including IEC 60601-2-27
Object
Electrocardiographs
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-25
Internal method identity
Comment
Including IEC 60601-2-25
Object
Electroencephalographs
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-26
Internal method identity
Comment
Including IEC 60601-2-26
Object
Endoscopic equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-18
Internal method identity
Comment
Including IEC 60601-2-18
Object
Fixed luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps
Parameter
Safety requirements
Reference standard
EN 60598-2-1
Internal method identity
TM-NO LITE 201-01
Comment
Including: IEC 60598-2-1
Object
Floodlights
Parameter
Safety requirements
Reference standard
EN 60598-2-5
Internal method identity
TM-NO LITE 201-05
Comment
Including: IEC 60598-2-5
Object
Floor treatment and wet scrubbing machines
Parameter
Safety requirements
Reference standard
EN 60335-2-10:2003/A1:2008
Internal method identity
TM-NO/Hous/101
Comment
Including: IEC 60335-2-10:2002 +A1:2008 EN 60335-2-10:2003 +A1:2008
Object
Grills, toasters and similar portable cooking appliances
Parameter
Safety requirements
Reference standard
IEC 60335-2-9
Internal method identity
TM-NO/Hous/201-09
Comment
Including EN 60335-2-9
Object
Haemodialysis, haemodiafiltration and haemofiltration equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-16
Internal method identity
Comment
Including IEC 60601-2-16
Object
High frequency surgical equipment and high frequency surgical accessories
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-2
Internal method identity
Comment
Including IEC 60601-2-2
Object
Household and similar electrical appliances
Parameter
General requirements
Reference standard
EN 60335-1
Internal method identity
TM-NO/Hous/101
Comment
Includes IEC 60335-1
Object
Infant incubators
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-19
Internal method identity
Comment
Including IEC 60601-2-19
Object
Infant radiant warmers
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-21
Internal method identity
Comment
Including IEC 60601-2-21
Object
Infant transport incubators
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-20
Internal method identity
Comment
Including IEC 60601-2-20
Object
Information technology equipment
Parameter
General safety requirements
Reference standard
EN 60950-1
Internal method identity
Comment
Including IEC 60950-1. Annex 3: "High current arching test" (and corresponding clause in the IEC 60950) is not included in the accreditation.
Object
Information technology equipment
Parameter
Safety
Reference standard
EN 60950-22
Internal method identity
Comment
Including IEC 60950-22. Equipment to be installed outdoors
Object
Invasive blood pressure monitoring equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-34
Internal method identity
Comment
Including IEC 60601-2-34
Object
Kitchen machines
Parameter
Safety requirements
Reference standard
EM 60335-2-14
Internal method identity
TM-NO/Hous/201-14
Comment
Including IEC 60335-2-14
Object
Light sources
Parameter
Safety requirements
Reference standard
EN 62471
Internal method identity
Comment
Includes IEC 62471 200 nm - 1700 nm
Object
Luminaires - Part 1: General requirements and tests
Parameter
Safety requirements
Reference standard
EN 60598-1
Internal method identity
TM-NO LITE 101-01
Comment
Including: IEC 60598-1
Object
Luminaires for emergency lighting
Parameter
Safety requirements
Reference standard
EN 60598-2-22
Internal method identity
TM-NO LITE 201-22
Comment
Including: IEC 60598-2-22
Object
Luminaires for road and street lighting
Parameter
Safety requirements
Reference standard
EN 60598-2-3:2003
Internal method identity
M-NO LITE 201-03
Comment
Including: IEC 60598-2-3:2002 +AMD1:2011 EN 60598-2-3: 2003+ A1:2011
Object
Luminaires for use in clinical areas of hospitals and health care buildings
Parameter
Safety requirements
Reference standard
EN 60598-2-25
Internal method identity
TM-NO LITE 201-25
Comment
Including: IEC 60598-2-25
Object
Luminaires with limited surface temperatures
Parameter
Safety requirements
Reference standard
EN 60598-2-24
Internal method identity
TM-NO LITE 201-24
Comment
Including: IEC 60598-2-24
Object
Medical beds
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-52
Internal method identity
Comment
Including IEC 60601-2-52
Object
Medical device software
Parameter
Software life cycle processes
Reference standard
IEC 62304
Internal method identity
Comment
Object
Medical devices
Parameter
Application of usability engineering to medical devices
Reference standard
EN 62366
Internal method identity
Comment
Including IEC 62366
Object
Medical electrical equipment
Parameter
Collateral standard, Usability
Reference standard
EN 60601-1-6
Internal method identity
Comment
Including IEC 60601-1-6
Object
Medical electrical equipment
Parameter
Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
Reference standard
EN 60601-1-8
Internal method identity
Comment
Including IEC 60601-1-8
Object
Medical electrical equipment
Parameter
Collateral Standard: Requirements for the development of physiologic closedloop controllers
Reference standard
EN 60601-1-10
Internal method identity
Comment
Including IEC 60601-1-10
Object
Medical electrical equipment
Parameter
General requirements for basic safety and essential performance
Reference standard
EN 60601-1
Internal method identity
Comment
Including IEC 60601-1
Object
Medical electrical equipment
Parameter
General requirements for basic safety and essential performance
Reference standard
EN 60601-1-11
Internal method identity
Comment
Including IEC 60601-1-11
Object
Medical electrical equipment - requirements for basic safety and essential performance
Parameter
Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
Reference standard
EN 60601-1-12
Internal method identity
Comment
Including IEC 60601-1-12
Object
Multifunction patient monitoring equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-49
Internal method identity
Comment
Including IEC 60601-2-49
Object
Nerve and muscle stimulators
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-10
Internal method identity
Comment
Including IEC 60601-2-10
Object
Non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/ aesthetic use
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-57
Internal method identity
Comment
Including IEC 60601-2-57
Object
Operating tables
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-46
Internal method identity
Comment
Including IEC 60601-2-46
Object
Portable general purpose luminaires
Parameter
Safety requirements
Reference standard
EN 60598-2-4
Internal method identity
TM-NO LITE 201-04
Comment
Including: IEC 60598-2-4
Object
Pulse oximeter equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
ISO 80601-2-61
Internal method identity
Comment
Object
Range hoods and other cooking fume extractors
Parameter
Safety requirements
Reference standard
EN 60335-2-31
Internal method identity
TM-NO/Hous/201-31
Comment
Including IEC 60335-2-31
Object
Recessed luminaires
Parameter
Safety requirements
Reference standard
EN 60598-2-2:2012
Internal method identity
TM-NO LITE 201-02
Comment
Including: IEC 60598-2-2:2011 EN 60598-2-2:2012
Object
Recording and analysing single channel and multichannel electrocardiographs
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-51
Internal method identity
Comment
Including IEC 60601-2-51
Object
Refrigerating appliances, ice-cream appliances and ice makers
Parameter
Safety requirements
Reference standard
IEC 60335-2-24
Internal method identity
TM-NO/Hous/201-24
Comment
Object
Room heaters
Parameter
Safety requirements
Reference standard
IEC 60335-2-30
Internal method identity
TM-NO/Hous/201-30
Comment
Object
Sewing machines
Parameter
Safety requirements
Reference standard
IEC 60335-2-28
Internal method identity
TM-NO/Hous/201-28
Comment
Object
Shavers, hair clippers and similar appliances
Parameter
Safety requirements
Reference standard
EN 60335-2-8
Internal method identity
TM-NO/Hous/201-08
Comment
Including IEC 60335-2-8
Object
Stationary cooking ranges, hobs, ovens and similar appliances
Parameter
Safety requirements
Reference standard
EN 60335-2-6
Internal method identity
Comment
Including IEC 60335-2-6
Object
Storage water heaters
Parameter
Safety requirements
Reference standard
EN 60335-2-21
Internal method identity
TM-NO/Hous/201-21
Comment
Including IEC 60335-2-21
Object
Surgical luminaires and luminaires for diagnosis
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-41
Internal method identity
Comment
Including IEC 60601-2-41
Object
Surgical, cosmetic, therapeutic and diagnostic laser equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-22
Internal method identity
Comment
Including IEC 60601-2-22
Object
Transcutaneous partial pressure monitoring equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-23
Internal method identity
Comment
Including IEC 60601-2-23
Object
Ultrasonic medical diagnostic and monitoring equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-37
Internal method identity
Comment
Including IEC 60601-2-37
Object
Ultrasonic physiotherapy equipment
Parameter
Particular requirements for the basic safety and essential performance
Reference standard
EN 60601-2-5
Internal method identity
Comment
Including IEC 60601-2-5
Object
Vacuum cleaners and water-suction cleaning appliances
Parameter
Safety requirements
Reference standard
EN 60335-2-2
Internal method identity
TM-NO/Hous/201-02
Comment
Including IEC 60335-2-2